Home Prev Next Touchstone TM502 Telephony Modem User’s Guide 17
Getting Battery USB Ethernet
Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary
3
Push the battery pack into the bay until it seats into place. The following di-
agram shows a Telephony Modem with a 2.2Ah battery pack installed.
If
you are taking the battery out of the unit, position your finger in the
battery opening area and use leverage to dislodge the battery while
pulling it straight back.
Note:
The Telephony Modem will not begin operating until you apply AC
power.
4
Replace the door. To do so, place the hinge tabs of the battery door into the
receiver slots inside the Telephony Modem battery compartment on the op-
posite end of the battery opening slot. Rotate the door toward the unit until
the latch snaps back into place.
Note:
Some Telephony Modem models use a Lithium-Ion battery pack. The
battery does contain precious material, there may be some benefit in recy-
cling. Please dispose of the battery responsibly and in accordance with local
ordinances.