675140

Arnold Rak OTN 2 Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
5
Settings
To set parameter values, press and hold the programming button for 3 seconds. SCA // Hi // 40 will be shown on the display. Firstly, SCA will be
displayed for 1 second, followed by Hi, and finally 40. The required value can then be set using the arrow buttons. To access the next parameter,
press the programming button again. If no buttons are pressed for 30 seconds, the program returns to the initial display.
Parameter Shown on display Factory setting OTD2 -1999 OTN2 -1991 OTN2 -1999
OJ standard
Max. temperature SCA // Hi // 40 40°C (0-40°C) X X X
Min. temperature SCA // Lo // 0 0°C (0-40°C) X X X
Max. limit temperature FLOOR Li // Hi // 28 28°C (15-40°C) X
Min. limit temperature FLOOR Li // Lo // 15 15°C (5-30°C) X
Measure floor temperature FLo // 24.5 X
Measured room temperature ro // 21.5 X
Application APp // A : Room sensor *1 XX
// F : Floor sensor *2 XX
// AF : Room with Limit sensor *2 X
// C : Controller X
Offset oFF // 0 0 (+/- 3°C) X X X
Night setback/ECO nSb // 5 5°C (2-8°C) X
*1 : Only available if floor sensor is not installed
*2 : Only available if floor sensor is installed
If Controller (C) is selected under Application, the floor and room sensors are disconnected and heating is controlled on a scale of 0-10, corresponding to 0-
100% activated
Error codes:
E1 - Sensor error. Sensor is short-circuited or disconnected. The LED is flashing red once.
E2 - Limit error. The temperature on the floor has surpassed max. limit temperature. The thermostat switch off the heating and the LED is flashing
red twice.
E5 - Overheating. The temperature is too high in the termostat and switch off the heating. The LED is flashing 5 times.
Type OTN2 / OTD2 with room or floor sensor English
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arnold Rak OTN 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arnold Rak OTN 2 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info