557780
20
Zoom out
Zoom in
Previous page
1/32
Next page
- 20 -
3.8.1 Answering
The engineer must enable this function to put the dialler (TD8803/TD8812) into automatic answer mode.
The dialler answers after about three rings and the
Engineer Access Number
is verified at both ends of the
line. If it is accepted, the engineer’s keypad takes control of the site's alarm system. If the account has a
TD8403/TD8412, all the telephone numbers can be changed. If the site has a TD8803/TD8812 all the
programmable options of the dialler, and the Aritech control panel, if attached, can be altered. The engineer
log of the control panel can also be read. To end the session go to the
Remote program
menu and select
Stop
.
3.8.2 Engineer Access No.
Program the code to be keyed in by the engineer to safeguard remote programming for the account. The
code must also be programmed into the remote dialler before remote programming can be carried out.
3.8.3 Stop
To end a remote programming session. This function is operated by the remote modem dialler control
panel.
3.9 Line monitoring (TD8803/TD8812 only)
The dialler has extensive line monitoring capabilities which can detect the following conditions: lost connec-
tion, engaged and incoming call signal.
3.9.1 Line monitor ON / OFF
Toggles line monitoring on and off. When line monitoring is ON and a fault is detected on the line, the dialler
will not attempt to dialuot and activates the FTC output.
3.9.2 Telephone line options
ALWAYS LINE FAULT:
If this option is selected the presence of a telephone line is constantly checked.
LF IN ALARM:
If this option is selected, a line fault is only regarded as a fault if present when the dialler
attempts to dial.
When there is a line fault, the dialler output (programmed for FTC / Line fault) is activated.
IGNORE OFF-HOOK:
If this option is selected, the dialler will not respond to any off-hook status created on the line.
3.9.3
Answ. Tel. in alarm
If the dialler detects an incoming call on the line which it wants to use to send a message there are two
options:
(I) to answer the call and then hang up.
(II) to wait until the incoming signal stops before forwarding the message.
3.9.4
Leave dialler
Press Enter . to exit engineer mode and return the dialler to normal operation.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech TD8403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech TD8403 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info