Manual Aritech SB 250 (page 15 of 79) (English, German, Dutch, French, Italian)

702731

Zoom out

Zoom in

1/79

• Prolonged interuption of the beam for more than 1 minute (interuption alarm).

For SB450, SB4100 and SB4200 detectors:

• Interupting the beam of just one of the two cells: alarm not triggered.

• Interupting the beam of both cells: intruder alarm.

• Prolonged interuption of both beams for more than 1 minute (interuption alarm).

10. Regular maintenance

To keep good ongoing performance levels, minimal maintenance is required:

• Clean the infrared covers of each module at least once a year (or more often,

depending on exposure to soiling).

• Repeat the final tests (once a year).

• Read the beam cell’s received signal values once a year in the same way as when the

equipment was installed (in order to identify any loss of performance).

11. Troubleshooting

Fault observed Probable cause Solution

The green “Tr ON” LED on the

transmission module is off

- Incorrect power supply - Check the power supply

- No power to the transmitter

module

- Check the transmission

power supply

- Transmitter and receiver

modules using different

channels

- Set the transmitter and the

receiver to use the same

channel

- Poor cell alignment

- Repeat the alignment

procedure

The orange “Disq.” LED on

the receiver module is

permanently lit

- Object obscuring the beams - Clear the paths of the beams

- Incorrect power supply to the

receiver

- Investigate the power supply

The red “Alarm” LED on the

receiver does not light up

when all the beams are

broken

- The beams of the two cells

are not broken simultaneously

(for SB450, SB4100 and

SB4200 detectors only)

- Break all the beams at the

same time

- Poor cell alignment

- Repeat the alignment

procedure

False alarms

- Incorrect power supply

- Check the cabling and the

cross-sectional area of the

cables used

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aritech SB 250 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aritech SB 250 Manual

Product: