636074

Aritech FP-FR 2000 Series Manual

47
Zoom out
Zoom in
Previous page
1/60
Next page
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 45
6.5 Installing a modem
The installation of the MOD2000 modem is described below. The modem is provided with
a bracket for wall mounting. To install this bracket, please refer to Figure 3, Figure 7 and
Figure 34.
1. Remove the protective cover from the double-sided self-adhesive tape on the rear-
mounting surface of the bracket supplied with the modem.
2. Position the mounting bracket inside the fire panel as shown in Figure 3 and Figure 7
and fix it into position using the double-sided self-adhesive tape.
3. Before connecting the modem to the fire panel ensure that the battery and the mains
power are isolated.
4. Carefully read the Modem User’s Manual. To connect the modem to the fire panel
and telephone line, refer to Figure 3, Figure 7 and Figure 34.
5. Connect the green earth wire leading from the modem to the earth stud inside the
fire panel. Please note that the modem and associated circuitry are only protected if
this connection is made.
6. Connect the power harness leading from the modem to the power supply. Observe
correct polarity. Please note that if the connector leading to the internal printer is not
used. It must be tied down using the mounting studs provided inside the fire panel.
7. Connect the RS232 input on the modem to the serial port (DB-9 connector).
8. Connect the telephone line to the modem protection board (use the telephone cable
adapter supplied if required).
9. Slide the modem into the bracket inside the panel and fix all cables in position using
the hardware supplied (P-Clips and nuts). Ensure that the modem cannot slide out of
the bracket.
10. Restore battery and mains power to the fire panel and turn the modem power switch
the ON.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech FP-FR 2000 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech FP-FR 2000 Series in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info