Manual Aritech FP-FR 2000 Series (page 31 of 60) (English)

636074

Zoom out

Zoom in

1/60

FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 29

Figure 17: Class B loop connection

1. Forward 3. Loop 1

2. Return 4. Loop 2

" y The FWD and Return of each class A loop used must be linked in the

correct polarity

y Isolators are polarity dependant (see Detector Installation and

Commissioning Manual)

y Preferably loop boards must be configured for class A

y A and B loops can be combined in the following way:

a) Configure as class A

b) Class B loops are connected as follows:

Figure 18: Class AB loop connection

1. Forward 3. Loop 1

2. Return

y The maximum of loops (either A or B) in one panel is limited to eight.

y All loop cards in a panel must be configured in the same way (either A or

B).

Loop devices

The FP2000 Series of analogue addressable fire panels are fully compatible with the

Aritech 900 range of detectors and manual call points, as well as with the Aritech range of

monitoring controllers and input/output devices. They are also fully compatible with the

Aritech Intrinsically Safe range of fire detectors.

The FP2000 Series of fire panels are also fully compatible with the Aritech 2000 range of

detectors, manual call points and input/output devices.

Dip switch 7 on the Host Power Supply board must be in the ON (up) position when using

Aritech 900 devices and in the OFF (down) position when using the Aritech 2000 devices.

(See Appendix A).

For information on any devices, refer to the appropriate Installation and Commissioning

Manual.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aritech FP-FR 2000 Series in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aritech FP-FR 2000 Series Manual

Product: