702727
3
Zoom out
Zoom in
Previous page
1/12
Next page
General Information
Copyright 1996 WARNING-Opto-Elektronik GmbH & Co Produktions KG
changes reserved
2
1 General Information
1.1 Functioning
Every Active Infrared Barrier consists of one IR-Transmitter/IR-Receiver.
For to allow trouble-free monitoring disturbing influences from outside,
for instance caused by sunlight or outside light, must be filtered out. This
is effected by a special receiver circuit which is insensitive to direct
sunlight radiation.
In order to reach higher functioning security the transmitter is triggered
by the receiver through a digital reference cable. An evaluation of the
IR-beam can only be carried out provided that the IR-beam is running
with the reference impulse at the same time.
Extension possibilities for the Infrared Barrier
The receiver can be extended by various options. Therefore an additional PC (B-board)
must be installed in the receiver:
Alarm memory for identification of the detector
armed/disarmed control input to erase blocking of the memory
disqualification in case of decreasing sight distance for instance caused by
severe snowfall or fog
lens heater, in order to prevent thawing of the optical equipment in case of quickly
changing temperatures
This infrared barriers which the alarm response sensibility will be modified by jumpers, can
carry just B-boards and the alignment tool, with the extension “N” in their identification
number.
1.2 Features
insensitive to direct sunlight radiation
long distance ranges indoors and outdoors
potential-free alarm output
adjustable alarm
technical alarm in case of function error
reduced transmitting power at short distance ranges
high EMV-resistance
simple instalment and alignment
as individual unit for wall mounting or
as pillar-mounted unit in moulded columns
weather- and corrosion-proof casing
VdS admitted, no. G197078
1.3 Monitoring range
Alarm
The linear range is monitored between the transmitter and
receiver.
An alarm will be released only when the IR-beam has been
interrupted completely.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech DO560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DO560 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info