557696
157
Zoom out
Zoom in
Previous page
1/167
Next page
CS175-275-575-875 Installation Guide 157
LED extinguish
This feature extinguishes all LEDs on the keypad, except the Power LED,
after 60 seconds without a keypress. Pressing any numeric key lights all
LEDs.
See
Location 34
on page 65 for more information.
LED Lockout
This feature causes the LED Extinguish feature to require a code to illuminate
the LEDs.
Local programming
lockout
This feature disables programming of all locations or specified locations from
the keypad.
See
Location 32
on page 64 for more information.
Manual test
The CSx75 can be programmed to perform a bell and/or communicator test
when 4 is pressed while the system is in the disarmed state.
See Location 51 on page 70 for more information.
On-board zone disable
The eight zones on the CSx75 panel can be disabled in order to have a
completely wireless alarm system.
See
Location 51
on page 70 for more information.
Open zone
A zone that is not secure such as a protected door or window which has been
left open.
Partitions
The CSx75 can be partitioned into a maximum of eight separate systems with
distinct reporting codes, user codes and operating features for each system.
See
Location 36
to
Location 43
, starting on page 67, for more information.
Program code
The factory default for the Go to program code is 1278
when using a four-digit
code or, if the six-digit location is used, the default is 127800. The Go to
program code can also be used as an arm/disarm code. If used as an
arm/disarm code and open/close reports are sent, the user code is 255.
See
Location 55
on page 72 for more information.
Quick arm feature
The CSx75 has a one button quick arm feature which can be used to arm the
system by pressing the Exit key or the Stay key on the keypad. If closing
reports are sent, the user code is 98.
See
Location 34
on page 65 for more information.
Recent closing
If enabled, the CSx75 sends a recent closing report to the central station if an
alarm occurs within five minutes after the panel is armed. The user number
that armed the system is also sent.
See
Location 34
on page 65 for more information.
Re-exit
The CSx75 has the ability to restart the exit delay for a quick exit without
disarming the system by pressing the Exit key while the system is armed.
See
Location 34
on page 65 for more information.
Shutdown
This mode causes the keypads to turn off all LEDs (except the Power LED)
and not accept keypresses.
See
Location 32
on page 64 for more information.
157


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CS875 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CS875 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech CS875

Aritech CS875 Installation Guide - Dutch - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info