557696
129
Zoom out
Zoom in
Previous page
1/167
Next page
CS175-275-575-875 Installation Guide 129
Location 0 Programming the option flag (one segment, FSD)
The CS586 protocol can operate in one of two possible modes - binary or ASCII. Consult
the home automation application information to determine the proper mode for your
application and program it in location 0.
Option 1
LED off = binary LED on = ASCII
Options 2 - 8
Reserved
Location 1 Baud rate table (one segment, ND)
See
Location 208
on page 82 for more information.
Location 2 Enabling the transitions (two segments,FSD)
The CS586 can be programmed to automatically send information to the home
automation system whenever a change is made to this information. This is referred to as
transition-based broadcasting. The information packets that use transition-based
broadcasting depend on the application and the capabilities of the home automation
system. Location 2 is used to enable and disable the appropriate transition based
broadcasts. Consult the home automation application information and enable the
appropriate transition based broadcasts in location 2.
See
Location 210
on page 82 for more information.
Location 3 Programming the command/request enables (four segments, FSD)
The CS586 can perform a variety of commands sent by the home automation system. For
example, it can allow the home automation system to arm, disarm and program the
security system, or bypass zones. Location 3 selects the commands the home automation
system can access. Consult the home automation application information and enable the
appropriate commands for your application.
See
Location 211
on page 83 for more information.
It is important to understand the capabilites of the home automation system to avoid
compromising the security of your system when programming this location.
Location 4 Programming the LCD keypad address (one segment)
In order to activate certain commands, the CS586 must know the location of at least one
LCD keypad (if one exists in the system). See
Appendix 3
for a list of LCD keypad
addresses.
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CS875 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CS875 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech CS875

Aritech CS875 Installation Guide - Dutch - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info