557693
11
Zoom out
Zoom in
Previous page
1/167
Next page
CS175-275-575-875 Installation Guide 11
4 INSTALLATION GUIDELINES
This installation manual details the installation and programming of the CSx75 using an
LCD keypad or LED keypad. You can also program the system from a PC using the
up/download procedure and Windows-based software.
4.1 Installing the system
Essential Optional
Control unit and keypad
Four or six-way security wire
Battery for control unit (7.2Ah
recommended)
Screws, wall plugs and cable clips
Sensors
Sounders
Screwdrivers, wire cutters and wire
strippers
Additional keypads
Additional expansion modules
Voice module
RS232 adapter (depending on model)
Keyswitch
PC with Windows software
Multimeter
Keypad on a long lead
Input and output expanders
Home automation module
"
The CS175 must have at least one keypad (LED or LCD) installed. On the CS275,
CS575 and CS875 you can disconnect the keypad after programming or program
remotely by means of the up/download package.
4.2 Wiring the system
The CSx75 control panel has been designed, assembled and tested to meet the
requirements of current relevant standards related to safety, emission and immunity
with respect to environmental electrical and electromagnetic interference. Only a
qualified electrician or other suitable trained and qualified person should attempt to
wire this system to the mains or to the public telephone network.
"
Always disconnect the mains power before opening the control panel cabinet. Disconnect
the AC mains plug from the AC mains wall socket or disconnect the mains by means of
the dedicated circuit breaker provided.
When installing the CSx75, you should follow local standards and the following guidelines.
1. Ensure that there is a good earth for the alarm system. A good earth is essential for
effective resistance to electrical interference. Do not forget to provide a network earth
for the telephone dialler.
2. Maintain a good separation between low voltage and mains supply cables. Use
separate points of cable entry to the control panel cabinet.
3. Avoid loops of wire inside the control panel and route cables so they do not lie on top
or underneath the printed circuit board. The use of cable ties is recommended and
improves neatness within the box.
4. Mains switching relays must not be fitted inside the control panel cabinet. The
switching of these relays may cause electrical interference. Any circuit connected
either directly to the on-board relay’s contact or to the external relay’s contact
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CS175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CS175 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech CS175

Aritech CS175 Installation Guide - Dutch - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info