This allows individual zones to be explicitly excluded from arming. This can be useful if a zone is misbehaving and is likely to cause a false alarm. You
must perform the inhibiting before you arm the system. For security reasons, the inhibited zones are automatically uninhibited each time the system is
disarmed.
1Enter the user code. ..........
2Press the down arrow. ................................................................
3Press OK. ....................................................................................
4Press OK. Any inhibited zones are displayed. ............................
5Enter the zone number that you want to inhibit followed by #.
Inhibiting zones should never be a regular procedure. It is provided to ensure that as much of your premises as possible can be protected during
temporary fault conditions. Contact your installer so that the fault can be corrected.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Aritech CS-250 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Aritech CS-250 in the language / languages: English as an attachment in your email.
The manual is 0,2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
