557703
11
Zoom out
Zoom in
Previous page
1/24
Next page
User Manual for CD72/95/15003
Page 11
U
SING A SPLIT SYSTEM
When the system was installed it was divided into different security areas. A system that has more than
one security area it is called a split system. These different areas were programmed by the installer.
Depending on how the system was programmed, your code may give you access to one or more of the
security areas.
Depending on how the system has been programmed, you may not need to do all
the steps shown in the instructions.
If you enter the wrong code 10 times consecutively, the system is automatically locked for 90 seconds.
During this time you cannot access the system.
A split system has two different standby displays. This is the display you see when you approach the
keypad. They are called ‘Time/Date display’ and ‘Status display.’ The installer programmes one of
these versions in your system.
Time/Date display:
It shows the current day, date and time. The system can also be
programmed to present a second display to show a message, such
as your company name for example.
TUE 23 APR 07.40
Status display:
It shows all the areas in the system (up to eight) and their security
status. There are five different labels to identify the status of an area.
If there are more than four areas, they will be shown in a second
display.
[
1
]
=2= <3> 4
[
1
]
[
1
]
=2=
<3>
4
square brackets. The area is armed.
(number flashing). Area number displayed is in alarm.
equal signs. The area is being armed (the exit time is still operating).
pointed brackets. The area is partially armed (partguard).
no brackets. The area is disarmed.
After entering your code, you will see one of two ‘selection’ messages. Which message you get
depends on which one the installer programmed. They are as follows:
1. The system lists the status of each area, one display per area. At
the end of the list you can enter the area number you want to
Area 1 Armed
access. If you do not enter a number, the standby display will
reappear.
Area 2 Disarmed
Enter Area No.
OR
2. The system lists the status of all the disarmed areas (underscore
scrolls underneath the numbers). If there are more than four areas,
[
1
]
2
<3> 4
they will be shown in a second display. You can then enter the area
number you want to access. If you do not enter a number, the
standby display will reappear.
Enter Area No.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CD15003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CD15003 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info