702272
26
Zoom out
Zoom in
Previous page
1/32
Next page
24 ATS1190 Programming Manual
2.17. Setting the security mode
The security mode is used to determine if programmed Smart Cards with credits and user defined cards can
be read, or only blank, unprogrammed cards with a unique serial number and user defined cards. To use the
unsecured mode, a special memory module is required. This option can be set using one of two methods:
1. Using a configuration card programmed with the Smart Card Programmer ATS1620 and the ATS8100
Titan Software package. This can be done when setting the address.
2. Using the Smart Card Reader menu.
Method Procedure
1. Set the security mode when setting
the address by programming a
configuration card using the TITAN
system management software and
the Smart Card programmer (ATS
1620).
1. Set the address as described under Setting the reader’s
address method 1, steps 1 and 2.
2. Select the required option in the list box labelled Security
mode.
3. Follow steps 3 through 5 as described under Setting the
reader’s address.
2. Set the security mode using the
Smart Card Reader menu.
1. Return to the Smart Card Reader menu as described
under Programming information in the Smart Card Reader.
2. Press 16 [ENTER] to enter the security mode setting. One
of two screens appears:
Or
Default: Secured
3. Use [Menu*] to toggle between the options.
4. Press [ENTER] to exit the option. The display shows the
Option Card menu.
Note: To enable option cards again, use the Smart Reader
Menu to enable the option again, default the reader or set
this option in a configuration card if this option has not
been used yet already. After disabling this option, a
configuration card can only be used once.
Secured mode
*-Chan
g
e, #-Exit
Unsecured mode
*-Chan
g
e, #-Exit
Tecom Smart Reader TS0870
0-Exit, Menu:
_
16- Security mode
0-Exit, Menu:
_
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info