702272

Aritech ATS1190 Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
ATS1190 Programming Manual 21
5. Each time there is a credit transaction the user’s credit account is reduced by the token value of the
reader (a credit account can also be set to a special value so no credit reduction occurs).
Explaining the items
Token value
(0-65535, default = 0)
This is a value representing a currency, time or just a number. You can set
how many credits equal one token.
Example: At a library photocopier, each time an A4 copy is made with the
card, one token worth 10 cents is deducted. For an A3 sheet 2 tokens are
deducted because of the larger paper size.
Credit account number
(1-4, default = 1)
The credit account to subtract the token value from (one of four available).
Access level
(1-16, default = 1)
Access (authorisation) level accepted by the reader (zero is invalid). The
card’s access level must be equal or greater than the reader’s access level
for the transaction to work.
Example: A manager might have an access level of 16, which means he can
use all photocopiers with Smart Card Readers installed in the building,
including all photocopiers set to a lower access level. (I.e., 15-1). Other
people might have an access level of 5, which allows them to use
photocopiers with readers set to an access level of 5 or below.
Location identifier
(1-4, default = 1)
Select a Location Identifier between the range 1 to 4 (zero is invalid). The
location identifier can represent an area, a floor, a group of floors in a multi-
story building, a building, or a group of buildings.
Example: You might have already given some staff the highest (access)
authorisation level of 16, but you want to stop them using the admin
photocopier.
Relay time factor
(1-256, default = 5)
This is used to modify the pulse width output of the Credit Relay Pulsed
option and the activation time for the Credit Relay Timed option in Setting the
relay option.
The pulse width for the “Credit Relay Pulsed” is the Relay Time Factor
multiplied by 0.01 seconds (10 milliseconds). This gives a pulse width
between 0.01 - 2.56 seconds.
The activation time for the “Credit Relay Timed” option is the Relay Time
Factor multiplied by the Token Value of the reader. This gives a range of
between 1 second and around 193 days.
There are two methods to set-up credits and relay timing:
1. Using a configuration card programmed with the Smart Card Programmer ATS1620 and the ATS8100
Titan Software package. This can be done at the same moment the address is set.
2. Using the Smart Card Reader menu.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info