702272
20
Zoom out
Zoom in
Previous page
1/32
Next page
18 ATS1190 Programming Manual
2.12. Setting the egress control
Egress is available only in on-line mode and uses the LED2 input. When connected to ground, the door will
open. The relay option has to be set to Door Relay.
Egress is also known as request-to-exit.
There are two methods to enable egress:
1. Using a configuration card programmed with the Smart Card Programmer ATS1620 and the ATS8100
Titan Software package. This can be done at the same moment the address is set.
2. Using the Smart Card Reader menu.
Method Procedure
1. Enable egress when setting the
address by programming a
configuration card using the TITAN
system management software and
the Smart Card programmer (ATS
1620).
1. Set the address as described under Setting the reader’s
address method 1, steps 1 and 2.
2. Select the required protocol from the list box labelled
Egress control.
3. Follow steps 3 through 5 as described under Setting the
reader’s address.
2. Enable egress using the Smart
Card Reader menu.
1. Return to the Smart Card Reader menu as described
under Programming information in the Smart Card Reader.
2. Press 10 [ENTER] to set the egress options. One of three
screens appears:
Or
Or
Default: Egress disabled
3. Use [Menu*] to toggle between the options.
4. Press [ENTER] to exit the option. The display shows the
egress control menu.
Egress Disabled
*-Chan
g
e, #-Exit
Egress only
*-Chan
g
e, #-Exit
Tecom Smart Reader TS0870
0-Exit, Menu:
_
Egress+Arm/Disarm
*-Chan
g
e, #-Exit
10-Egress control
0-Exit, Menu:
_
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info