702272
11
Zoom out
Zoom in
Previous page
1/32
Next page
ATS1190 Programming Manual 9
2.4. Changing the LED off-line operation
The Smart Card Reader is “off-line” when it is connected to a Wiegand or magstripe interface. When off-line,
the LEDs can be set using a one-wire or two-wire operation. There are two methods:
1. Using a configuration card programmed with the Smart Card Programmer ATS1620 and the ATS8100
Titan Software package. This can be done when setting the address.
2. Using the Smart Card Reader menu.
Method Procedure
1. Change the LED off-line operation
when setting the address by
programming a configuration card
using the TITAN system
management software and the
Smart Card programmer (ATS
1620).
1. Set the address as described under Setting the reader’s
address method 1, steps 1 and 2.
2. Select the required option in the list box labelled Off-line
LED options.
3. Follow steps 3 through 5 as described under Setting the
reader’s address.
2. Change the LED off-line operation
using the Smart Card Reader
menu.
1. Return to the Smart Card Reader menu as described
under Programming information in the Smart Card Reader.
2. Press 2 [ENTER] to enter the Off-line LED options. One of
two screens appears:
Or
Default: Two-wire LED control
3. Use [Menu*] to toggle between the options.
Option
Operation
One-wire LED control
Brown wire controls blue & red LED
Two-wire LED control
Red LED = brown wire; Blue LED = yellow wire
4. Press [ENTER] to exit the option. The display shows the
LEDs Off-Line menu.
Note: In the off-line mode the brown and yellow wires control
the LEDs. See the Smart Card Programmer Installation Guide
for further details.
Two Wire Led Control
*-Chan
g
e, #-Exit
One Wire Led Control
*-Chan
g
e, #-Exit
2- Leds Off-Line
0-Exit, Menu:
_
Tecom Smart Reader TS0870
0-Exit, Menu:
_
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info