655848
46
Zoom out
Zoom in
Previous page
1/68
Next page
assembly. An expansion vessel may be installed in order to prevent this leakage.
Activate the tap and the valve on the safety assembly every month so as to prevent
limescale from building up. Replace the safety assembly at least once every 5 years or, if
necessary, more frequently.
The appliance and its safety assembly must be installed in a room which is not subject
to freezing conditions.
When performing maintenance work, the following should be provided:
- a free space of at least 50 cm in front of the plastic cover so that the electrical components
may be accessed;
- direct access to the safety assembly.
For safety reasons, if away from the premises,users must turn the hydraulic and electric
circuits off, as well as drain the appliance.
➢Cut off the electricity supply before performing any work on the appliance.
➢Shut off the cold water supply at the inlet.
➢Open the hot water tap to draw water.
➢Open the emptying valve on the safety assembly and the water will ow out of the
drainage hole.
To prevent burns from occurring, use suitable mixers which ensure that the temperature
does not exceed 50ºC at the drawing points and 60°C for the kitchen .
• Recommendations for installation in a bathroom environment:
The water heater installation in the bathroom must be adapted in accordance with national
rules and standards in force (NFC 15-100, RGIE, etc.).
➢The system must be tted with a switch which has an opening of 3 mm between con-
tacts. The circuit must be protected by fuses or switches which are calibrated according to
the power of the water heater.
➢ The electric water heater must be connected in accordance with European regu-
lations and the connections must always conform to current national legislation. The line
must be protected by a 30 mA differential switch.
➢The electrical connection of a xed appliance should be performed using a suitable
rigid wire with an appropriate cross-section and a green/ yellow earth wire: please consult
current national legislation relating to electrical systems (the minimum requirement will be
3 x 2.5 mm² singlephase and 4 x 2.5 mm² three-phase for a power level of up to 3000 W).
• CAUTION: the appliance MUST be earthed!
Do not use piping for an earth connection.
If the appliance is supplied with rechargeable batteries, these must be removed before
the appliance is discarded and disposed of in a safe manner. The batteries must be remo-
ved from the support structure located in the area which can be accessed from underneath
the plastic cover.
The manufacturer shall not be held liable for any damage caused to persons , animals or
other things , by unprofessional or improper installation, or by failure to comply with current
legislation or the instructions contained in this booklet.
46
GB
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston STEA-serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston STEA-serie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info