Manual Ariston MBT1821Z (page 18 of 72) (English, French, Italian, Polish, Portuguese, Spanish)

23847

Zoom out

Zoom in

1/72

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in

an upright position and wait at least 3 hours before

connecting it to the electricity mains, to make sure it

operates as it should.

• Clean the inside of the refrigerator well using warm

water and bicarbonate of soda before placing food

inside it.

•

The appliance comes with a motor protection control

system which makes the compressor start

approximately 8 minutes after being switched on.

The compressor also starts each time the power

supply is cut off whether voluntarily or involuntarily

(blackout).

Freezer Compartment

When the product is switched on (the ON/OFF button is

pressed for more than two seconds) the freezer

compartment is set to its default value of -18°C. We

recommend that the SUPER FREEZE function is set (the

freezer display shows the text “SF”) in order to accelerate

the cooling process of the compartment; when the inside

of the compartment has reached its optimal temperature

the function will be deactivated and the food may be

placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator

compartment is set to its default value of +5°C. We

recommend that the SUPER COOL function is set (the

refrigerator display shows the text “SC”) in order to

accelerate the cooling process of the compartment. After

a few hours it will be cool enough for food to be placed

inside.

Cool Care Zone

When the appliance is switched on the variable

temperature compartment will be set to its default value of

-12°C.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer

displays will indicate the temperatures set at that moment.

To change them, simply press the + and - buttons

corresponding to the compartment for which you wish to

change the set temperature. To be specific, each time one

of the buttons is pressed the temperature is increased or

decreased by 1°, and the number of illuminated horizontal

bars is adjusted accordingly. The temperature values that

may be selected for the refrigerator compartment are

+8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the

values that may be set for the freezer are -18°C, -19°C, -

120°C, -21°C, -22°C, -24°C and -26°C.

It is possible to select an operating temperature for the

Cool Care Zone compartment using the corresponding

button; the temperatures are represented by the icons on

the central part of the display (Ice Cream -12°C, Berries -

8°C, Alcohol -18°C). When the three icons are switched

off, it is operating as a normal freezer compartment.

The temperatures are automatically set to +5°C for the

refrigerator compartment and -18°C for the freezer

compartment (these are standard food storage values).

The Cool Care Zone is automatically set to -12°C.

When the “I Care” function is active, the appliance

automatically adjusts the temperatures according to the

conditions inside and outside the refrigerator; the

operation of this function is signalled by the text “AUTO”.

Whenever it is necessary to activate the “I Care” function

at temperatures that are different to the standard storage

values, the “I Care” button must be pressed as soon as

the function is activated and held down while the new

temperatures are set using the + and - buttons. Under

these conditions, the temperatures may be set to 4°C, 5°C

and 6°C for the refrigerator compartment and -18°C, -

19°C and -20°C for the freezer compartment.

When the HOLIDAY function is active the temperature

may not be adjusted, however the appliance adjusts itself

automatically so that the optimal settings for the situation

are used: +12°C for the refrigerator compartment and -

18°C for the freezer compartment. This function is

indicated by the text “AUTO”.

To activate and deactivate the functions simply press the

relevant button and the function status will be signalled by

the corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE, ICE

PARTY, ICE CARE) are incompatible with others

(HOLIDAY,...); remember that there is a pre-set order of

priority which will help you to use the product in the best

possible way.

Child Lock

To enable the Child Lock function, the ALARM button must

be pressed for 2 seconds; the button lock activation is

confirmed by a short beep and the text “CH” “LO”

appears on the refrigerator and freezer displays. This text

is then replaced by the refrigerator and freezer

temperatures set prior to when the child lock function was

enabled.

To deactivate the function, press the ALARM button or 2

seconds; deactivation will be confirmed by a short beep

and the text “CH” “LO” will appear on the refrigerator and

freezer displays for 1 second.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston MBT1821Z in the language / languages: English, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston MBT1821Z Manual

Product: