Manual Ariston LZ 700 DUO (page 17 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

454524

Zoom out

Zoom in

1/80

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

First of all.

After performing all the operations

described in the previous

paragraphs, turn the water tap on

completely and press ON-OFF

button "A": you will hear a short

beep and the display lights up,

and the wash cycle time selected

on the knob will flash. Now the

appliance is on and ready to be

programmed.

Selecting the wash

cycle.

Turn knob "M" until the reference

notch on the knob corresponds with

the number or symbol for the cycle

you wish to set (have a look at the

wash cycle table on page 17). Press

the Start button "R" and the wash

cycle starts up, the approximate

amount of time left until the end of

the wash cycle is displayed.

After

a few seconds, you will hear a short

beep: the wash cycle has begun and

indicator "G" displays the symbol

corresponding to the cycle starting

phase.The counter "L" will indica-

te the estimated amount of time

left until the end of the wash cycle.

Do not expect a precise countdown

as the wash cycle starts with an

estimated cycle time that is

updated as the cycle progresses and

according to a number of

parameters that affect the cycle

itself (such as water hardness, the

temperature of the water, the

degree of soil, etc.).

The dishwasher informs

you.

Your dishwasher is provided with

an indicator light (G) with 4

symbols which come on as the

appliance carries out the wash

phase indicated by the indicator

light.

These indicator lights represent the

phases corresponding to:

pre-wash, wash, rinses, drying.

At all times, your dishwasher tells

you where it is at.

Modifying a wash cycle

in progress.

But if you have chosen the wrong

cycle, not to worry! You can modify

the wash cycle in progress only if

it has only just started.

Keep the Reset button "R" pressed

for about 3 seconds:

a prolonged beep will sound,

followed by three short beeps. The

cancelled cycle time will flash on

the display. Turn the knob to select

a new wash cycle.

You've left out a dish?

Well, it happens to everyone.

Interrupt the wash cycle by

pressing the ON-OFF button, insert

the dish you had forgotten and

press the ON-OFF button again.

The cycle will start up from where

you interrupted it.

Finished?

The end of the wash cycle is

indicated by two short beeps and

the word "END" flashes on the

display.

You have loaded your dishes and you now have

to set the wash cycle. It takes just one minute

to learn how

Starting the dishwasher

Make sure the

wash cycle has

ended before

removing the

dishes!

There's been a power

failure? Have you

opened the dishwasher

door?

The wash cycle stops and then

restarts when the electricity comes

back on or when you close the door.

Everything is under control!

You want to wash on

one rack only?

Remember to use half

the amount of detergent.

Your dishwasher also allows you

to wash half a load When you only

have little cutlery to wash, you can

run just half a load on the upper

rack, saving on both water and

electricity.

Press button "N"; you will hear a

beep and the symbol V

corresponding to the half load will

light up.

Once you have made your setting,

start the wash cycle by pressing

the START button.

- This option is available with all

wash cycles.. Press it once more

to reset the rack selection and the

dishwasher will consequently wash

on both racks.

How to set the extra

drying

If you want your dishes to be

perfectly dry, follow the

instructions below.

Press button "H". After a prolonged

beep, indicator light "Z" lights up

and the time corresponding to the

wash cycle selected on the knob

will flash on the display.

To disable the extra drying option,

press the same button and

indicator light "Z" will be turned off

after a beep is sounded.

This option is incompatible with the

soak cycle. Remember that with

extra drying, the wash cycle will

last longer, to provide you with drier

dishes.

You decide when it

starts.

When you have loaded the dishes,

you can choose when to start your

dishwasher before setting the wash

cycle desired.

Press button "I" repeatedly to

postpone the start of the wash

Ready, steady, go!

The delayed start is

also reset

automatically should

you fail to select the

wash cycle within 15

seconds.

cycle from 01 hour to 24h.

If you press the button again, the

word "OFF" is displayed (no

selection made).

Once you have made your

selection, make sure the appliance

door is shut and start the wash

cycle by pressing the START

button.

Symbol "U" lights up on the display

and the countdown begins.

Once the countdown is up, the

wash cycle begins and the

approximate amount of time left

until the end of the wash cycle is

displayed. A quick look at the

indicator lights will keep you

informed of the countdown

progress at all times.

Have you changed your

mind?

If you change your mind, you can

set a shorter time delay: press

button "I" to select it. You need not

reset the wash cycle.

If you have changed your mind and

wish to start the wash cycle

immediately, press button "I" until

the countdown is fully reset.

Indicator light "U" will turn off and

the cycle will start at the sound of

a beep.

The indicator light corresponding

to the cycle phase under way will

come up on the display and the

countdown to the estimated cycle

end begins.

Warning!

Turn the appliance off at the ON-

OFF button , unplug the appli-

ance from the electricity socket

to cut off the power supply; the

power supply cable should con-

sequently be easily accessible.

Turn off the water tap.

Empty the lower rack first.

Make sure the wash cycle has

ended before removing the dishes!

Warning: when you open the

dishwasher door after the wash

cycle has just ended or is under

way, take care not to scald yourself

with the hot steam.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston LZ 700 DUO in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston LZ 700 DUO Manual

Product: