Manual Ariston LVR670 (page 17 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

21892

Zoom out

Zoom in

1/80

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

You have loaded your dishes and you now have

to set the wash cycle. It takes just one minute

to learn how

Starting the dishwasher

Ready, steady, go!

You can cancel

the wash cycle

in progress, if it

has only just

started.

If opening the

door soon after

the end of the

programme,or

during it, stand

away from the

Dishwasher, to

avoid possible

injury from hot

steam.

First of all.

After performing all the operations

described in the previous

paragraphs, turn the water tap on

completely and press ON-OFF

button "A": you will hear a short

beep and indicator light "B" lights

up. Now the appliance is on and

ready to be programmed.

Selecting the wash

cycle.

To select the wash cycle, turn knob

"D" clockwise until the reference

notch on the knob corresponds

with the number or symbol for the

cycle you wish to set (have a look

at the wash cycle table on page

17). A short beep will indicate the

start of the wash cycle and

indicator light "G" corresponding

to the cycle starting phase will light

up.

The dishwasher keeps

you informed.

Your dishwasher is fitted with

indicator lights (G) which light up

to indicate the cycle phase under

way.

Here are the symbols correspond-

ing to each cycle phase:

pre-wash, wash, rinses, drying.

At all times, your dishwasher tells

you which cycle phase is under

way.

Modifying a wash cycle

in progress.

But if you have chosen the wrong

cycle, not to worry! You can modify

the wash cycle in progress, if it has

only just started. Turn the knob

anti-clockwise until it reaches the

Reset position and, after a few

seconds, you will hear 4 beeps

and indicator light "G" will turn

off. This is to inform you that

all the settings have been can-

celled. You are now free to re-

set the correct wash cycle.

You've left out a dish?

Well, it happens to everyone.

Interrupt the wash cycle by

pressing the ON-OFF button,

insert the dish you had forgot-

ten and press the ON-OFF but-

ton again. The cycle will start

up from where you interrupted

it.

Finished?

The end of the wash cycle is

indicated by two short beeps

and the flashing of the drying

phase indicator light.

Turn off the water tap.

Wait a few minutes before un-

loading the dishes: they are very

hot! If you wait a little while,

they dry better thanks to the

steam.

Empty the lower rack first.

There's been a power

failure? Have you

opened the dishwasher

door?

The wash cycle stops and then

restarts when the electricity

comes back on or when you

shut the door. Everything is

under control!

Do you want extra

drying?

Press button "E" before you

start the selected wash cycle.

A prolonged beep will inform

you that you have selected ex-

tra drying, a short beep

indicates it has been disabled.

With extra drying, the wash

cycle will last longer, to provide

you with drier dishes.

Warning:

Turn the knob anti-clockwise to

Reset in order to reset all the

settings. Turn the appliance off

by pressing button A, unplug the

appliance from the electricity

socket to cut off the power supply;

the power supply cable should

consequently be easily

accessible.

Make sure the

wash cycle has

ended before

removing the

dishes!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston LVR670 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 13,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston LVR670 Manual

Product: