Manual Ariston LV 650 A (page 17 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

454518

Zoom out

Zoom in

1/80

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

You have loaded your dishes and you now have to set the

wash cycle. It takes just one minute to learn how

Starting the dishwasher

Ready, steady, go!

You can cancel the

wash cycle in

progress, if it has

only just started.

Make sure the wash

cycle has ended

before removing the

dishes!

If opening the door

soon after the end of

the programme,or

during it, stand away

from the Dishwasher,

to avoid possible

injury from hot

steam.

First of all.

After performing all the

operations described in the

previous paragraphs, turn the

water tap on completely and

press ON-OFF button "A": you

will hear a short beep and

indicator light "B" lights up.

Now the appliance is on and

ready to be programmed.

Selecting the wash

cycle.

To select the wash cycle, turn

knob "D" clockwise until the

reference notch on the knob

corresponds with the number

or symbol for the cycle you

wish to set (have a look at the

wash cycle table on page 17).

For a few seconds, the

indicator light "G" concerning

the pre-wash cycle phase

begins to flash, then it stays

permanently on without

flashing for another 10 seconds

approximately. During this

time, you can modify your

choice of wash cycle. A short

beep will indicate the start of

the wash cycle and indicator

light "G" corresponding to the

cycle starting phase will light

up.

The dishwasher keeps

you informed.

Your dishwasher is fitted with

indicator lights (G) which light

up to indicate the cycle phase

under way.

Here are the symbols corre-

sponding to each cycle phase:

pre-wash, wash, rinses, drying.

At all times, your dishwasher

tells you which cycle phase is

under way.

Modifying a wash cycle

in progress.

But if you have chosen the

wrong cycle, not to worry! You

can modify the wash cycle in

progress, if it has only just

started. Turn the knob anti-

clockwise until it reaches the

Reset position and, after a few

seconds, you will hear 4 beeps

and indicator light "G" will turn

off. This is to inform you that

all the settings have been can-

celled. You are now free to re-

set the correct wash cycle.

You've left out a dish?

Well, it happens to everyone.

Interrupt the wash cycle by

pressing the ON-OFF button,

insert the dish you had forgot-

ten and press the ON-OFF but-

ton again. The cycle will start

up from where you interrupted

it.

Finished?

The end of the wash cycle is

indicated by two short beeps

and the flashing of the drying

phase indicator light.

Turn the knob anti-clockwise to

Reset in order to reset all the

settings.

Turn the appliance off to cut off

the electricity supply.

Turn off the water tap.

Wait a few minutes before un-

loading the dishes: they are very

hot! If you wait a little while,

they dry better thanks to the

steam.

Empty the lower rack first.

There's been a power

failure? Have you

opened the dishwasher

door?

The wash cycle stops and then

restarts when the electricity

comes back on or when you

shut the door. Everything is

under control!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston LV 650 A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston LV 650 A Manual

Product: