454551
12
Zoom out
Zoom in
Previous page
1/57
Next page
11
GB
e) Make the electrical connection of the hood by
means of the power cable (refer to the
paragraph “Electrical connection”).
f) Remove the adhesive tape and pull the lower
flue downwards, placing it gently onto the
apparatus.
g) Check if the charcoal filter P has already been
installed; this filter is not necessary for the
suction version, therefore it must be removed
(see the instructions in the “Replacing the
charcoal filter” chapter).
h) Installation is now complete and the grease
filters can be reassembled.
5) Filtering version:
a) Insert the air baffle (M) in the structure.
b) Through the openings N, fit the flange (Q) to
the baffle (M) locking it with a turning
movement. Fix a flexible pipe (R) to the flange
(Q) for air evacuation (the flexible pipe s not
supplied).
c) Take the upper flue (with the round slots) and
fit it on the telescopic structure with the slots
facing upwards; fit the flue to the bracket with 2
screws (E) - figure on previous page.
d) Take the lower flue (F) and fit it in the same
manner as before; slide it to the top and stop it
in that position using a adhesive tape - figure
on previous page.
e) Take the reduction (S) and assemble it onto
the air venting opening of the hood, pressing
slightly.
f) Fit the hood to the telescopic structure by
means of 4 screws H (provided).
g) Fix the air evacuation pipe (R) onto the
reduction (S).
h) Make the electrical connection of the hood by
means of the power cable (refer to the
paragraph “Electrical connection”).
i) Remove the adhesive tape and pull the lower
flue downwards, placing it gently onto the
apparatus.
l) Check if the charcoal filter P has already been
installed; this filter is necessary for the filtering
version therefore it must be installed by
inserting the 2 filter tabs into the relevant
housing and turning in an upward direction.
m) Installation is now complete and the grease
filters can be reassembled.
P
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston HDMI 91 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston HDMI 91 IX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info