454549
16
Zoom out
Zoom in
Previous page
1/68
Next page
16
4.3 - Installation of the
chimney A
No matter which type of installation is
being used, any wooden shelves in the
area where the hood is to be fitted must
first be removed, drilled and later
replaced.
1 - Drilling the shelves:
a) Using the cardboard template
provided, and taking hole “B” as a point
of reference, drill the shelves along the
central axis to allow the passage of the
chimney. The chimney must be inserted
into the shelves before it is fixed to the
hood canopy C (fig. 12).
b) When installing the ducting version
with the air outlet directed upwards, if the
ducting fan unit is positioned below the
line of shelves it will be necessary to drill a
suitable hole in the top shelf only, to allow
the air ducting pipe to pass through
(fig. 13).
2 - Direction and position of the ducting
fan unit
a) The hood is normally supplied with the air outlet directed
towards the wall (fig. 3), if it is to be
installed with the air outlet directed
to the right or left (fig. 4a-b), it will
be necessary to change the direction
of the ducting fan unit,
proceeding as follows:
- Unscrew the screws U (fig. 14);
- Turn the ducting fan unit 60° to
the right or left;
- Replace the screws U.
b) The ducting fan unit air outlets
must be arranged according to the
type of installation to be carried
out.
· Air outlet directed upwards
(fig. 2a-b).
- Remove the plastic plug from the upper part of the venting grill and
replace it on the rear part (fig. 15).
· Air outlet directed towards the wall (fig. 3).
- Remove the plastic frame from the air outlet (fig. 16).
U
U
A08_14
14
S07_22
15
S07_14
16
S28_08
12
S28_13
13
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston HDM 9 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston HDM 9 IX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info