47997
16
Zoom out
Zoom in
Previous page
1/84
Next page
16
Programming the cooking mode
The cooking time and/or end cooking time can be
programmed after the desired cooking mode has been
selected.
Programming the cooking time
Press button 5 and then adjust the cooking time by turning
knob C. Press the OK button to store the setting. The tem-
perature selected (which can be adjusted using knob C)
and the amount of time left until cooking is complete will
be displayed alternately.
Once this time is up, the word “end” will be displayed and
a sequence of acoustic signals will be emitted to indicate
that cooking is complete.
Press any button to silence the acoustic signal.
Turn knob B back to position 0 to remove the word
“end” from the display.
For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes
is programmed. Cooking will stop automatically at 10:15
a.m..
Programming the end cooking time
Press button 4 and then adjust by turning knob C. Press
the OK button to store the setting. The display will remind
you alternately of the temperature selected and the amount
of time left until cooking is complete.
When the end cooking time selected previously is up, the
word “end” will be displayed and a sequence of acoustic
signals will be emitted to indicate that cooking is comple-
te.
Press any button to silence the acoustic signal.
Turn knob B back to position 0 to remove the word
“end” from the display.
For example
It is 9:00 a.m. and the end cooking time is set at 10:15
a.m.. Cooking will last 1 hour and 15 minutes.
Delayed cooking programming
Press button 5 and then adjust the cooking time by turning
knob C. Press the OK button to store the setting. The tem-
perature and the time set previously will be displayed
alternately.
Press button 4 and then adjust the end cooking time by
turning knob C. Press the OK button to store the setting
and the display will remind you of the end cooking time
and of the temperature set alternately.
For example
It is 9:00 a.m. and a cooking time of 1 hour and 15 minutes
and 12:20 as the end cooking time are programmed.
Cooking will start automatically at 11:15 a.m..
The icon A will remind you that you have programmed the
cooking time and/or the end cooking time.
To cancel a programmed time
To cancel any programming you have made, set knob “B
to position “0”.
DO NOT WORRY IF
1 you see ventilated air exiting the oven for a while when
cooking is complete: it is due to the normal cooling
phase of the oven interior;
2 when using the “grill” mode, the top heating element
isn’t always on (red in colour): its operation is controlled
by a thermostat;
3 a blast of hot steam exits the oven when you open the
door during cooking;
4 drops of water or steam form inside the oven if you
leave food inside the oven after cooking is complete;
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston FO 97 C.1 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston FO 97 C.1 E in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info