454688
18
Zoom out
Zoom in
Previous page
1/66
Next page
19
To fasten the oven to the
cabinet, open the door of
the oven and fasten it by
inserting the 4 wood screws
into the 4 holes locate on
the perimeter of the frame.
The panels of the adjacent
cabinets must be made of
heat resistant material. In
particular, cabinets with a
veneer exterior must be assembled with glues able to
withstand temperatures of up to 100°C.
In compliance with current safety standards, contact with
the electrical parts of the oven must not be possible once
it has been installed.
All parts which ensure safe operation of the appliance must
not be able to be removed without the use of a tool.
Electrical Connection
Those ovens equipped with a three-pole power supply cord
are designed to operate with alternating current with the
voltage and frequency indicated on the data plate (located
on the appliance) and in the instruction manual. The wire
for grounding the appliance is yellow-green in color.
Mounting a Power Supply Cable
Opening the terminal board:
V
Remove the "V" screw;
Pull to open the cover of the terminal board.
To install the cable, proceed as follows:
Remove the wire clamp screw and the three contact
screws L-N-
Fasten the wires beneath the heads of the screws using
the following color scheme : Blue (N) Brown (L) Yellow-
Green
Fasten the suppy cable in place with the clamp, close the
cover to the terminal box and fasten it with the "V" screw.
Attaching the Power Supply Cable to the Mains
The appliance must connected directly to the mains by
means of an omni-polar switch with a minimum contact
break of 3 mm, sized for the load and in compliance with
the standards currently in effect (the earthing wire must
not be interrupted by the switch).
The power supply cord must be positioned so that it does
not reach a temperature 50°C above ambient temperatu-
re at any one point.
Before making the connection, check that:
the fuse and the electrical system in the home can
handle the load of the appliance (see the data plate);
the electrical mains in the home are equipped with an
efficient grounding system in compliance with the safety
standards currently in effect;
The electrical outlet or omnipolar switch is within easy
reach when the oven is installed.
NB: Do not use adaptors, shunts or reducing devices as
they may cause overheating and lead to fires.
Technical Specifications
Inner Dimensions of the Oven:
Width - 40 cm
Depth - 39 cm
Height- 34 cm
Inner Volume of the Oven:
53 Liters
Energy Consumption:
To reach 200°C: 0.45 kWh
To maintain the temp. at 200°C for 1 hour: 0.95 kWh
Total: 1.40 kWh
Voltage and Frequency of Power Supply:
230V / 50Hz / 2950W
This appliance conforms with the following European
Economic Community directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic
Compatibility) and subsequent modifications;
- 93/68/EEC of 22/07/93 and subsequent modifications.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston FD 87 Ice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston FD 87 Ice in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info