47729
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
GB
NOTE:The Cookpot symbol disappears
(b) To set the Timer to switch ON immediately and OFF automatically after a set cook period:
Step 1 Check that the correct time of day is set, if not follow instructions for ‘Setting the Time of Day’.
Step 2 Place food onto the correct shelf position in the oven(s) and close the door(s).
Step 3 Turn the oven control(s) to the required temperature and if necessary select the appropriate
oven function.
Other notes on Timer operation:
1 When cooking automatically the Cook Period can be checked at any time simply by pressing the Cook
Period button.
2 When cooking automatically the End Time can be checked at any time by simply pressing the End Time button.
3 Having set a Cook Period and End Time an electronic device stores the information. The device within the
Timer will switch the oven(s) on and off at the required times.
4 When setting an Auto Cooking Programme and a mistake is made, to clear:
(a) Press and release the Manual button.
(b) Start the sequence again.
5 If at any time the display shows three flashing zero’s 0.00 and ‘Auto’, it is likely that the electricity supply to
the oven has been interrupted. Reset the Timer to the correct time of day.
Food in the oven may therefore not have been cooked, before serving check food is thoroughly heated and
completely cooked.
6 To set each function always press and hold the required function button and at the same time press the ‘+’ or
‘-’ buttons.
To cancel an Auto Cooking Programme before the Cook Period has finished:
Step 4 Press and hold in the Cook Period, the display
will read 0.00 and the ‘cookpot’ symbol will
light up.
With the Cook Period button still held in, set the
required Cook period using the ‘+’ and ‘-’ buttons.
Example 1 hour 30 minutes (as shown).
Note: Cook Period is the length of time the food
requires to cook.
Step 5 Release all buttons.
The timer display will revert to the time of day, with the
‘Auto’ symbol lit and the ‘cookpot’ symbol remaining lit.
At the end of the Cook Period the ‘Auto’ symbol will
flash and an intermittent audible tone will be heard.
The audible tone will continue unless cancelled. The
‘Auto’ symbol will continue to flash until the Timer is
returned to Manual operation (see below).
Step 6 Press the Manual button, the audile tone will
be cancelled and the oven(s) will be returned
to manual operation.
Step 7 Turn the oven control(s) to the OFF position.
Step 1 Turn the oven control(s) to the Off position.
Step 2 Press the Manual button to return the oven(s)
to Manual operation. The ‘Auto’ symbol will go
out.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston DB62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston DB62 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info