Manual Ariston CD12T (page 14 of 14) (English)

47703

Zoom out

Zoom in

1/14

m odel

CD 12 T

dimensions

width cm 59,8

height cm 82

depth cm 53,7

capacity

1 - 5 Kg

electrical

connections

voltage 240 Volt 50 Hz

maximum absorbed pow er 2300 W

water

connections

maximum pressu re 1 M Pa (10 bar)

minimum pressu re 0,05 MPa (0,5 bar)

drum capacity 42 litres

spinning speed

up to 1200 rpm

This appliance conforms with the follow ing E.E.C.

directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and

subsequent modifications

- 89/336/EEC of 03/05/89 (Electrom agnetic

Com patibility) and subsequent modifications

Using the Drilling Template

Place the top edge of the drilling template so that it is flush

with the top edge of the panel, making sure that it is positioned

correctly and centered in the horizontal direction (use the dotted

lines on the edges to line the template up). Mark the points on

the panel for the four holes.

· Use an appropriately sized router to mill the holes for the

two hinges, the rubber plug and the magnet.

Mounding the Parts onto the Wooden Panel

(Door)

· Insert the hinges into the holes (the movable part of the

hinge must be positioned facing away from the panel) and

fasten them with the 4 type A screws.

· Insert the magnet into the top hole on the opposite side

of the hinges and fasten it with the two type B screws.

· Insert the rubber plug into the bottom hole.

The panel is now ready to be mounted onto the machine.

Mounting the Panel into the machine

Insert the nib of the hinge (indicated by the arrow in fig. 10)

into the hole for the hinge and push the panel towards the

front of the machine. Fasten the two hinges with the type

D screws.

Inserting the machine into the Cabinet

· Push the machine into the opening, aligning it with the

cabinets (fig. 15).

· Regulate the adjustable feet to raise the machine to the

appropriate height.

· To adjust the position of the wooden panel in both the

vertical and horizontal directions, use the C and D screws,

as shown in fig. 16.

· If the machine is installed at the end of a set of modular

cabinets, mount either one or both of the guides for the

base molding (as shown in fig. 17) with the type F screws.

Adjust them for depth based on the position of the base

molding, and, if necessary, fasten the base to the guides.

Technical characteristics

90 mm

570

min

820

537

598

820

÷ 870

600 min

Fig. 17

Fig. 15 Fig. 16

Control programs in compliance with IEC regulation 456:

Cotton program:

Turn knob A to the "program 2"setting;

Turn knob B to the "60°C" setting;

Press Extra economy button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston CD12T in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston CD12T Manual

Product: