566474
19
Zoom out
Zoom in
Previous page
1/94
Next page
19
GB
When lifting loads with a crane or hoist, make sure the equipment used
for lifting is stable and effi cient and suitably sized for the movement
and weight of the load itself; place the load correctly in slings, tie ropes
around it to limit any oscillations and lateral movements; lift the load
from a position where there is a full view of all the space covered by the
load during lifting; do not allow people to pass or stop in the vicinity of
the suspended load.
Personal injury from objects falling from
a height. Damage to the appliance or sur-
rounding objects due to the appliance fall-
ing from a height, knocks.
Do not direct the air fl ow towards valuable articles, plants or animals. Damage or perishing due to excessive cold/
heat, humidity, ventilation.
Install the device on a solid wall that is not subject to vibrations. Noise during operation.
Place the condensation drainpipe in such a way as to ensure the correct
ow of water towards places where it cannot disturb or damage people,
things or animals.
Damage to objects due to dripping water.
When drilling the wall, take care not to damage any electrical wiring or
existing piping.
Damage to existing plants. Flooding due to
water leaking from damaged pipes.
Perform all electrical connections using suitably-sized conductors. Fire caused by overheating due to electrical
current passing through undersized cables.
Use electrical equipment suitable for the intended use (in particular,
make sure that the power supply cable and plug are intact and that the
parts featuring rotary or reciprocating motion are fastened correctly);
use this equipment correctly; make sure no equipment could fall from a
height. Disconnect it and put it safely back in place after use.
Damage to the appliance or surrounding
objects from falling splinters, knocks and
incisions.
Protect the device and all areas in the vicinity of the work area using
suitable material.
Damage to the device or surrounding ob-
jects caused by fl ying splinters, knocks and
incisions.
Move the appliance with the necessary care. Damage to the device or surrounding ob-
jects caused by shocks, knocks, incisions
and crushing.
Organise the dislocation of all debris and equipment in such a way as
to make movement easy and safe, avoiding any piles that could yield or
collapse.
Damage to the device or surrounding ob-
jects caused by shocks, knocks, incisions
and crushing.
Reset all safety and control functions affected by any work performed
on the device and make sure that they operate correctly before restart-
ing the device.
Damage or shutdown of the device caused
by out-of-control operation.
The appliance must be installed in full compliance with national system regulations.
If the power supply cable is damaged, it must be replaced by the manufacturer or
by its technical assistance service, or at least by a suitably qualifi ed individual,
in order to prevent all hazards.
The installation must be carried out by professionally qualifi ed staff, in possession of the skills as required by law
During the installation process, the refrigerator should be connected fi rst, followed by the electricity supply.
In the event of replacement, proceed in the reverse order.
The air conditioning unit must be earthed completely to avoid electric shocks. Do not connect the earthing line to anti-
lightning systems, water or gas pipes, earthing line of the telephone system.
Do not install the air conditioning unit near heat sources or fl ammable material.
Symbol legend:
Failure to comply with this warning implies the risk of injury to persons, which in some circumstances may be fatal.
Failure to comply with this warning implies the risk of damage, in some circumstances serious, to property, plants or animals.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston AERES 25 XC8-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston AERES 25 XC8-I in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ariston AERES 25 XC8-I

Ariston AERES 25 XC8-I Additional guide - English - 88 pages

Ariston AERES 25 XC8-I User Manual - English - 48 pages

Ariston AERES 25 XC8-I Additional guide - Dutch - 88 pages

Ariston AERES 25 XC8-I User Manual - Dutch - 48 pages

Ariston AERES 25 XC8-I Additional guide - French - 88 pages

Ariston AERES 25 XC8-I User Manual - French - 48 pages

Ariston AERES 25 XC8-I Additional guide - Italian - 88 pages

Ariston AERES 25 XC8-I User Manual - Italian - 48 pages

Ariston AERES 25 XC8-I Additional guide - Portuguese - 88 pages

Ariston AERES 25 XC8-I User Manual - Portuguese - 48 pages

Ariston AERES 25 XC8-I Additional guide - Spanish - 88 pages

Ariston AERES 25 XC8-I User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info