47603
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Functions
To enable a function:
1. press the button corresponding to the desired
function, according to the table below.
2. the function is enabled when the corresponding
LED is illuminated.
The rapid flashing of the button indicates that the
corresponding function cannot be selected for the
programme set.
Setting the temperature
Turn the TEMPERATURE knob to set the wash
temperature (see Programme table).
The temperature can be lowered, or even set to cold
wash .
Setting the spin speed
Models A1600 and A1400 only:
Use the ‘Reduced Spin’ Option button, to reduce
programme spin speed to 1000rpm (cottons
programmes).
The maximum spin speeds for each programme are
as follows:
Programmes Maximum spin speed
Cottons 1600rpm - Model A1600WD
1400rpm - Models A1400SWD
and A1400WD
1200rpm - Model A1200WD
Synthetics 800rpm
Wool 600rpm
Silk no
Personalisation
Function
Effect
Comments
Enabled with
programmes
All programmes
(Models
A1600WD,
A1400SWD and
A1400WD only)
Delay Timer
Delays the start
of the wash by
up to 9 hours.
Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the START/RESET button, the
delay can only be decreased if you wish to modify it.
1, 2, 3, 6, 7.
Super Wash
Allows for an
impeccable wash,
visibly whiter than
a standard Class
A wash.
This function is incompatible with the RAPID function.
1, 2, 3, 6, 7.
Rapid
Cuts the duration
of the wash cycle
by 30%.
This function is incompatible with the SUPER WASH function.
All programmes
except for 1, 2,
4, 8, 9, 10 and
Draining
(Model
A1200WD only)
Easy Iron
This option
reduces the
amount of
creasing on
fabrics, making
them easy to iron.
When this function is set, programmes 6, 7, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED will flash.
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
1, 2, 3, 4
(Models
A1600WD,
A1400SWD and
A1400WD only)
Reduced Spin
Reduces the final
spin speed to
1000rpm
Reduces the final spin speed on cotton programmes.
1, 2, 3, 4, 6, 7.
(Model
A1200WD only)
Extra Rinse
Adds one extra
rinse cycle.
Remember - you will use more water than with a standard
cycle.
GB
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston A1200WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston A1200WD in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info