645906
11
Zoom out
Zoom in
Previous page
1/14
Next page
EN
- 9 -
26. DO NOT INSERT PINS OR NEEDLES.
If the safety fuse blows, the appliance must be returned to the manufacturer or 27.
its representative.
HOW TO GET STARTED
CONNECTION OR REMOVAL OF THE TEMPERATURE ADJUSTMENT
CONTROL (FIG. 2)
WARNING!
Use the electric blanket only with the control provided. The relative model is specified on
the plate sewn on the panel.
- Insert the control inlet (F) into the plug (G) to connect the temperature adjusting control to the electric blanket.
- Repeat the procedure for the second inlet in case of double bed model.
- Disconnect the inlet (F) from the electric blanket by holding the retaining levers on the sides of the plug (G).
PLACEMENT OF ELECTRIC BLANKET (FIG. 1-2)
WARNING!
Only position the electric blanket between the mattress and the first sheet, not directly
on persons in bed.
- Lay the electric blanket (B) directly on the mattress (A) with the side where the plug is located (G) towards
the mattress.
- Do not place the electric blanket under the pillow.
- Make sure the electric blanket is always properly laid out.
- Lay the first sheet (C) on the electric blanket, then make the bed with the sheet (D) and the blanket (E) as
usual.
USE
SWITCHING ON OF THE ELECTRIC BLANKET AND SELECTION OF THE
CORRECT TEMPERATURE
WARNING!
DO NOT place the control under the pillow or sheets during use.
- Plug in the appliance.
- Switch on the electric blanket one hour before going to bed by positioning the temperature adjusting button
on the required level: “1” minimum temperature, “2” medium temperature, “3” maximum temperature.
- When the warning light is on, the appliance is in operation.
- After approximately one hour the bed will be pleasantly warm. Should the room be particularly cold, switch
on the electric blanket two or three hours before lying down.
- Position the control on “0” to switch the electric blanket off.
- Before lying down, position the control onto “0” to switch the electric blanket off and unplug the appliance.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 8814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 8814 in the language / languages: English, Italian as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info