Manual Ariete 693 Gran Gelato (page 12 of 82) (English, German, Dutch, French, Italian, Portuguese, Spanish)

645978

Zoom out

Zoom in

1/82

- 10 -

IMPORTANT: It is not necessary to chill the container in a freezer because this ice cream maker has

an internal compressor that will chill the ingredients to make the ice cream.

APPLIANCE ASSEMBLY

WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE

FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.

IMPORTANT: Always use the ice cream maker upright and on a flat surface to get the best from the

compressor.

- Insert the removable container (D) into the fixed one (C) inside the machine (Fig. 2).

- Place the mixing paddle (E) inside the removable container (D) (Fig. 3).

- Fit the lid (F) onto the appliance body, holding the mixing paddle (E) in the upright position in the

centre of the lid and locking it in place by turning it clockwise so that the tabs on the power base

slot into the openings on the lid (Fig. 4).

- Close the opening for inserting ingredients with the special cap (G) (Fig. 5).

- Fit the power unit (H) onto the lid (F) and make sure that the motor axle has been inserted properly

into the hole on the top part of the mixing paddle (Fig. 6).

INSTRUCTIONS FOR USE

IMPORTANT: Before starting the ice cream maker, make sure that it has been perfectly assembled

and the power unit has been firmly attached to the lid.

- Plug the appliance into a mains power socket. Press the power button (P) to supply power to the

appliance; the display (L) will show“60.00” meaning that the default operating time is 60 minutes.

- Based on the recipe, press the Timer button (N) to set the operating time: press the button repeat-

edly until the required time (10, 20, 30, 40, 50, and 60 minutes) is shown on the display (L).

- Pour the previously prepared mixture in through the opening in the lid (F) (Fig. 6).

IMPORTANT: To avoid excessive volumes or waste, make sure that the ingredients never exceed

80% of the capacity of the removable container (D). Remember that ice cream increases in volume

while it is being made.

- At this point, press the start button (O) to start up the appliance and it will start to prepare ice

cream. At the same time, the mixing process will commence with the mixing paddle (E), together

with the chilling process, via the internal compressor and both LEDs (I-M) will switch on.

- When the power button (P) is pressed during the ice cream making process, the appliance will

immediately commence a countdown of three minutes, after which the machine will start up again;

the chilling and mixing functions will start up together. If, while counting down, the power button

(P) is pressed again, the mixing function will commence immediately while the chilling function will

only commence after the countdown.

IMPORTANT: If there is a power blackout or the appliance is suddenly disconnected while making

ice cream, there will be no automatic countdown function. We recommend starting the machine after

3 minutes, otherwise it will pass into compressor auto-protection mode.

- When the two processes have been completed and the ice cream is ready, the appliance will stop

automatically and an acoustic warning will sound 10 times. The display (L) will read “00.00” to

show the end of the countdown.

IMPORTANT: Never remove the power unit (H) while the ice cream is being made.

The wall of the interior ice cream container freeze with a layer of the ice cream,before the ice cream is whipped up and the paddle sticks and stop working. What is the Fix? Submitted on 3-10-2021 at 14:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 693 Gran Gelato in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariete 693 Gran Gelato Manual

Product: