645844

Ariete 6233 Eco Power Manual

12
Zoom out
Zoom in
Previous page
1/63
Next page
12

When the iron reaches the selected temperature, the lamp (E) turns off (the temperature lamp turns off and on while ironing,
indicating that the iron is maintaining the right temperature).
Follow the instructions on the care label of the garment to be ironed so that the dots
shown on the iron correspond to those shown on the label.

Divide the articles to be ironed according to the types of material: wool with wool, cotton with cotton, etc…
Because the iron heats up much more quickly than it cools down, it is advisable to start with those fabrics which require
lower temperatures and move on to those which require progressively higher temperatures.
If the material is made up of more than one type of bre, always set the temperature to the bre which requires less heat.
For example, if the material is made up of 70% synthetics and 30% cotton, set the temperature control to position (
•
) (see
table) without steam, that is, the temperature for synthetic fabrics.
If you do not know the composition of the article to be ironed, choose a part of the article which will not be seen. Do a test
ironing on this part to establish the appropriate temperature (always start with a relatively low temperature and work up until
the ideal temperature is reached).
Pure (100%) wool articles can be ironed with the iron set to one of the steam positions. To avoid pure wool, silk and synthetic
materials becoming shiny, it makes good sense to iron them on the reverse side. For other materials, especially velvet,
which can become shiny very easily, cover them with a cloth and iron in one direction only, using light pressure. The iron
must be kept constantly moving over the fabric.
Label Ironing
instructions
Kind of fabric Thermostat
Synthetic fabrics
Acetate
Acrylic
Viscose
Poliammide (Nylon)
Viscose (Rayon)
Silk
•
Wool
••
Cotton
Linen
•••
The mark on the label means do not iron

Steam ironing is only possible at high temperature.
Ensure that there is enough water in the water tank.
Rest the iron upright on the iron stand (H).
Insert the plug into the wall socket.
Position the temperature adjustment knob (F) on position (
•••
) or higher.
When the temperature control lamp (E) turns off, move the steam adjustment selector (B) to the desired position. You get
maximum steam dispensing by moving the selector to the “MAX” position.
Steam is not dispensed when it is moved to “ ” (Fig. 2).

If there is water in the tank and the temperature is set on (
•••
) or on a higher level, all you have to do is press the steam
button (C).

Make sure the steam adjustment selector is set on “0” and that there is water in the tank. Press the spray button (D).
It may be necessary to press the spray button repeatedly to activate this function.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 6233 Eco Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 6233 Eco Power in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info