645969

Ariete 4611 Easy Fry Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
EN
- 9 -
- Fit the handle (C) to the basket (D), inserting the two handle pins into the housing on the basket
(Fig. 4).
- Immerse the basket (D) into the oil, resting the handle (C) on the appliance body (H) and then cover
with the lid (F) (Fig. 5), using the relevant handgrip (G) and resting the slots over the handle (Fig. 6).
- Plug the appliance into the mains power. The On/Off light (M) will switch on.
- Set the required temperature according to the food being fried, using the special selector dial (A).
The temperature light (L) will switch on.
- When the oil reaches the correct temperature and it is ready for frying, the temperature light (L)
will switch off. The light may switch on and off during use to indicate that the fryer is maintaining
the correct temperature.
- Remove the lid (F) using the special handgrip (G) and take out the basket (D), resting it on the
edge of the appliance body (H) with the relevant hook (Fig. 7).
- Place the food for frying inside the basket (D) without overloading it and referring to the table
below. Lower the basket and close the lid (F) as described previously.
- Look at the cooking time, which varies according to the food, in the table on the appliance body.
Always check the cooking through the viewing window (E) on the lid (F).
- When the food is cooked, move the temperature selector (A) to “0”, unplug the appliance from the
mains power and repeat the steps described above to raise the basket (D). Leave the oil to drain
into the tank (I) before taking out the fried food.
IMPORTANT
Before using the appliance, always make sure that all parts have been correctly assembled.
Dry off any excessively wet foods before immersing them in the oil. Remove any excess ice
from frozen foods before immersing them in oil by tapping the basket (D) on a sink bowl.
Ice and/or water can cause boiling oil to splash.
Take care not to come into contact with boiling oil.
CARING FOR YOUR APPLIANCE
IMPORTANT:
Before removing the parts from the appliance for cleaning, switch off the appliance, unplug it
from the mains power and wait for the oil inside it to cool down.
Never place the power unit (B) in water or under running water from the tap.
- Take out the parts from the appliance body (H), and remove the handle (C) from the basket (D).
- Empty the oil from the tank (I) and dispose of it.
- Remove any residues from inside the tank (I) using a cloth or some kitchen towel.
- All parts, except the power unit (B), can be washed in hot water and are also dishwasher safe. Do
not use abrasive sponges or detergents.
- Wipe the power unit (B) clean with a damp cloth.
- Dry all parts with great care.
- The permanent filter, which is part of the lid (F), is washable and will not need replacing.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 4611 Easy Fry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 4611 Easy Fry in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info