Manual Ariete 441 Grati (page 27 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

645981

Zoom out

Zoom in

1/36

- 27 -

I SMONTAGGIO/ MONTAGGIO RULLO

GB REMOVING/ FITTING THE ROLLER

F DEPOSE/ POSE ROULEAU

D AUSBAU/ EINBAU REIBETROMMEL

E DESMONTAJE/ MONTAJE RODILLO

P DESMONTAGEM / MONTAGEM DO ROLO

NL DEMONTAGE/ MONTAGE ROL

Fig. 6 Ruotare a motore spento di circa 1/4 di giro in senso antiorario la ghiera dentellata, poi tirare verso l’esterno il

rullo. Fig. 7 Per rimontare il rullo è sufficiente inserirlo nella sua sede, e tenendolo premuto, ruotare di 1/4 di giro in

senso orario. Uno scatto segnalerà l’aggancio automatico.

Fig.6 Bei abgeschaltetem Motor die Nutmutter um eine 1/4 Drehung gegen den Uhrzeigersinn drehen. Anschließend die

Reibetrommel herausziehen. Fig. 7 Zum Wiedereinbau die Reibetrommel wieder einführen, gedrückt halten und um eine

1/4 Drehung in Uhrzeigersinn drehen. Ein Schnappgeräusch zeigt Ihnen, daß sich die Reibetrommel automatisch eingehakt

hat.

Fig.6 A moteur coupé, tourner la bague crénelée d’environ 1/4 de tour dans le sens contraire des aiguilles d’une /montre,

puis tirer le rouleau vers l’extérieur. Fig. 7 Pour remonter le rouleau, il suffit de l’introduire dans son logement et de le

tourner de 1/4 de tour dans le sens des aiguilles d’une montre tout en le pressant. Un déclic signale l’accrochage automatique.

Fig. 6 Draai de getande borgmoer met afgezette motor ongeveer een kwart slag tegen de wijzers van de klok in en trek

vervolgens de rol naar buiten. Fig. 7 Voor het opnieuw monteren van de rol volstaat het deze in z’n steun te plaatsen ,aangedrukt

te houden en een kwart slag in de richting van de klok te draaien. Een klik geeft het automatisch op z’n plaats geraken aan.

Fig. 6 Girar con motor apagado 1/4 de giro en sentido antihorario la rueda dentada, luego tirar hacia el externo el rodillo

Fig. 7 Para volver a montar el rodillo es suficiente colocarlo en su sede, y teniendolo apretado hacerlo girar 1/4 de

vuelta en sentido horario. Un golpe señalará el enganche automático.

Fig. 6 Rodar, com o motor desligado, de aproximadamente 1/4 de giro no sentido contrário aos ponteiros do relógio o anel

dentado, em seguida puxar para o exterior o rolo. Fig. 7 Para voltar a montar o rolo, é suficiente introduzi-lo no seu alojamento,

e mantendo carregado, rodar de 1/4 de giro no sentido dos ponteiros do relógio. Um “clic” indicará o engate automático.

Fig.6 Turn off the motor, then rotate the indented ring nut anticlockwise by about 1/4 and draw the roll outwards. Fig.

7 To refit, introduce the roller into its housing, keep it pressed and rotate clockwise by about 1/4. A click will signal the

automatic link.

GR ΑΠΟΣΥΝΑΡΜΟΛΟΓΗΣΗ / ΣΥΝΑΡΜΟΛΟΓΗΣΗ ΚΥΛΙΝ∆ΡΙΚΟΥ ΤΡΙΦΤΗ

Εικ. 6 Με σβηστ µοτέρ, γυρίστε προσ τα αριστερά κατά 1/4 στροφήσ την οδοντωτή ρυθµιστική

ροδέλα και τραβήξτε προσ τα έξω τον κυλινδρικ τρίφτη. Εικ. 7 Για να επανασυναρµολογήσετε

τον κυλινδρικ τρίφτη, βάλτε τον στην έδρα του και κρατήστε τον πιεσµένο, γυρνώντασ

προσ τα δεξιά κατά 1/4 στροφήσ την οδοντωτή ρυθµιστική ροδέλα. Θα ακούσετε ένα

χαρακτηριστικ θρυβο που σηµαίνει πωσ έχει κουµπώσει.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 441 Grati in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariete 441 Grati Manual

Product: