645891
10
Zoom out
Zoom in
Previous page
1/55
Next page
10

17 - Power cord + Plug
18 - Reference on the cover
19 - Lid opening position
20 - Filter holder with lter extraction position
21 - Lid closing position

The label under the power base shows the following identication data of the appliance:
manufacturer and CE mark electrical supply voltage (V) and frequency (Hz)
model (Mod.) absorbed electric power (W)
serial number (SN) assistance toll-free number
Always give the model and serial number to the Authorised Service Centres when requesting assistance.


Before connecting the appliance to the mains check that the voltage indicated on the label under the power
base matches with the local mains. Place the appliance on a horizontal and stable surface.

Do not place the appliance or power cord close to or on top of hot electric or gas cookers, or close to
a microwave oven.
Prevent the cord from protruding beyond the edge of the table or surface. Prevent children from grab-
bing the cord, in this way tipping over the appliance.
If the power cord is too long, wrap it under the power supply base (Fig. 3). The cable must not touch
the hot parts of the appliance.
Position the appliance so that children cannot reach the hot parts.


The water lling and emptying operations must be carried out with the jug separated from the power
base.
Do not use the jug without water.


Remove the jug from the power supply base. Rotate the lid in the lter holder extraction position (20). Remove
the lter holder from the jug (Fig. 5). Fill the jug with fresh plain water to the desired level (Fig. 6). The level
should never be less than two cups (Fig. 7).

Turn the lid in position (X19). Remove the lid and extract the tea lter (Fig. 8). Place the desired amount of tea
in the lter. Place the tea lter in the lter holder. Place the lter holder into the jug. Close the lid and rotate it
to align the reference with the closing symbol (21). Place the jug on the power base (2).
Insert the plug into the socket, which must be earthed. You will hear two beeps. Press the infusion start/delete
button (11). The display shows the last temperature set. If you do not press any button, after 30 seconds the
appliance turns off.
10


Need help? Post your question in this forum.

Forumrules
1

Forum

ariete-2894-automatic-tea-maker-lipton

Reset search

  • My teamaker just stopped pusching up the water to the tea filter.
    Anything I can do?
    Owe Submitted on 29-8-2018 at 17:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 2894 Automatic Tea Maker Lipton at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 2894 Automatic Tea Maker Lipton in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info