Manual Ariete 2741 XForce (page 10 of 50) (English, German, French, Italian, Portuguese, Spanish)

646049

Zoom out

Zoom in

1/50

- 8 -

Parquet brush (G)

This can be used to clean delicate surfaces.

Narrow suction nozzle with brush (H)

This suction device is ideal for cleaning between the folds on fabrics, joints, corners or niches that

are impossible to reach using the floor cleaning device. This attachment can also be fitted directly

to the handle (I).

VACUMM CLEANER ASSEMBLY

WARNING: Before tting or removing the attachments, always make sure that the vacuum clean-

er has been unplugged from the power mains.

- Fit the suction device (I) into the air inlet opening (C) and press it in until it clicks into place. To

remove it, it is necessary to press the two release buttons (L) at the same time and to pull it out

(Fig. 2).

- Insert the telescopic tube (Q) into the handle (Fig. 3).

- Push the slider device (P) forwards and pull the bottom section of the tube out to the required

length (Fig. 4). Then simply release the slider and the device will return to its original position.

- Fit the required attachment to the telescopic tube.

USING THE APPLIANCE

Caution: Before using the vacuum cleaner, remove all large or sharp objects from the oor to

avoid any possible damage to the cleaner itself.

First of all, before using this appliance, unwind the power cord completely and plug the appliance into

the mains socket.

To switch on the appliance, press the foot switch (A) on the vacuum cleaner. While using the appli-

ance, pull it along behind you as if it were a trolley.

Important: In some cases, the appliance may “whistle” when switched on. This is not a fault and

the noise will go away with time.

Suction power adjustment

It is possible to regulate the suction power as required, using the relevant dial (F). We recommend

using a minimum power for delicate materials. Select medium suction power for mattresses, uphol-

stered furniture and carpets. Select maximum suction power for tiled, wood or other resistant oors.

Secondary air valve (M)

The secondary air valve (M) is on the hand grip (N) and it is used to regulate suction power. The wider

the valve is opened, the less the suction power and vice versa.

- To open the valve, push it upwards and to close it, push downwards.

Open the valve to prevent curtains and the like from being sucked into the cleaner.

- Minimum suction power for curtains and delicate materials.

- Medium suction power for cushions, mattresses and carpets.

- Maximum suction power for tiled, wood or other resistant oor surfaces that are heavily soiled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 2741 XForce in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariete 2741 XForce Manual

Product: