645918
23
Zoom out
Zoom in
Previous page
1/40
Next page
EN
- 21 -
CLEANING MODE
The robot cleaning is automatic.
By pressing the “CLEAN” button on the appli-
ance body, start the cleaning” mode. Pro
Evolution will clean the room autonomously by
alternately applying:
- spiral movements
- linear, perimeter movements
- linear, diagonal movements
by automatically adapting its path according to
obstacles on the floor:
ATTENTION: for a more effective cleaning and to ensure Pro Evolution covers the whole
surface of the room without leaving any zones in the shortest time, it is necessary to remove
obstacles from the floor as much as possible.
ATTENTION: to prevent Pro Evolution from being snagged, remove or lift electric cables
and wires that may wrap around the rotating brushes causing the risk of furniture fall or Pro
Evolution breakage.
ATTENTION: in case the appliance is used in room subject to high solar exposure, it is recom-
mended to close the shutters thus partially reducing the exposure to prevent infiltrations that
may improperly modify the direction and path of the appliance.
PRO EVOLuTION bEHAVIOuR duRING CLEANING CYCLE
The time required to cover a room may change according to the type of floor, the obstacle amount that
Pro Evolution may find on its path and the possible differences in floor level.
Thanks to its front anti-collision sensors, Pro Evolution detects surfaces (walls, furniture, etc.) by
avoiding to collide with them. In presence of corners or furniture tubular parts, a light impact may be
possible.
Owing to the special fall-protection sensors on the base, Pro Evolution detects differences in floor level
or empty spaces thus avoiding falls from stairs or ledges.
Pro Evolution can pass different levels, as thresholds and carpets, and wiggle out of obstacles (tubes,
stands, etc.) lower than 1 cm.
ATTENTION: in case of carpet cleaning, prevent Pro Evolution from coming in contact with
fringes and avoid cleaning of shaggy carpets, as they ma wrap around the rotating brushes.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 2713 Robot Pro Evolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 2713 Robot Pro Evolution in the language / languages: English, Italian as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info