646018

Ariete 1779 RoboMix Manual

12
Zoom out
Zoom in
Previous page
1/56
Next page
EN
- 10 -
- Cut the foods into small pieces and place them inside the bowl (D) or for mixing, insert the ingre-
dients.
- Fit the lid (E) over the bowl (D) moving the mark inside the bowl (D) so that it is in line with the
symbol (
). Block the lid (E) so it clicks into place by moving it clockwise ( ) (Fig. 7).
- Plug the appliance into the mains power.
- Start the appliance, selecting the rotation speed of the blade using the operating dial (A).
The appliance is equipped with a control knob for adjusting the speed from a minimum to a maxi-
mum.
WARNING
When the appliance is used to for mixing or whipping-up, it is recommended to start with the lowest
speed and then increase the speed. When used to chop, it is advisable to use the pulse function,
turning the dial (A) anticlockwise to the “P” setting. For optimum use, press the button in short bursts
(2/3 sec.).
- For smoother, finer chopped foods, remove the food, if necessary, from the sides of the bowl with
a spatula, pushing it towards the centre.
- If it is necessary to add foods during appliance operation, use the opening in the lid (E). Push the
foods down with the pusher (F) on its own (Fig. 8).
- To stop the appliance, turn the dial (A) to “0”.
Slicing
WARNING
The blades are sharp; handle with care.
- Fit the required blade, the slicing blade (P), julienne blade (O) or chip blade (Q) into the blade disc
(R) so that the hole in the blade is in the centre of the disc (Fig. 9).
- Fit the assembled blade support disc (r) on the motor shaft (C), gripping it by the relevant slots and
keeping the blade so it is facing upwards (Fig. 10).
- Fit the lid (E) over the bowl (D) and proceed as described in the section “Chopping, mixing or
whisking”.
INSTRUCTIONS FOR BLENDER USE
- Fit the blender (I) onto the power base (B) and turn it clockwise until it clicks into place and so that
the tabs on the blender fit perfectly into the slots in the power base (Fig. 11).
- Fit the lid (H) onto the blender (I) and press it gently down until fully inserted (Fig. 12).
- Insert the foods (prepared previously) through the opening in the lid, without exceeding the maxi-
mum level, which is marked on the blender (I) and then insert the plug (G) into the lid (H) pressing
it gently downwards and turning it clockwise to lock it into place (Fig. 13).
Note: The plug (G) also has a measure.
- Switch on the appliance, selecting the blade rotation speed with the operating dial (A).
The appliance is equipped with a control knob for adjusting the speed from a minimum to a maxi-
mum.
It is also possible to select pulse operation by turning the dial (A) anticlockwise to “P”. For the best
use of this function, only turn the dial for a very short time (2-3 sec.).
Note: For softer fruit and vegetables (e.g., bananas), start at slow speed and then increase the speed
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 1779 RoboMix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 1779 RoboMix in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info