645835
11
Zoom out
Zoom in
Previous page
1/53
Next page
11



All cleaning operations described below must be performed with the machine off and with the electric plug discon-
nected from the socket-outlet.

Regular maintenance and cleaning preserve and keep the machine efcient for a longer amount of time. Never
wash machine components in the dishwasher. Do not use direct jets of water. Never put the boiler (G) or power
supply base (H) in contact with water.

All operations must be performed when the machine is cold.
The boiler (G) and power supply base (H) can be cleaned with a damp cloth. Do not use abrasive detergents or metallic
utensils.
When you remove the seal (E) and disc lter (D) for cleaning or replacement, make sure you correctly put them back in
place so as to prevent splashes or spurts of hot water. Check that the holes of the disc lter are not clogged and if so, clean
them with a small brush (Fig. 4).
When the seal and disc lter show signs of wear or deterioration, they have to be replaced. Use original spare parts that can
be purchased at authorised service centres.

A layer of lime may form on the bottom of the boiler over time, after numerous pots of coffee have been made; this may
lead to a longer percolation time. To remedy this problem, it is necessary to periodically eliminate this layer of lime with a
descaling process.
Use proprietary coffee machine descaling products found on the market (citric acid, for example).
Follow these directions to descale:
Make sure the coffee machine is cold and unscrew it.
Fill the boiler with the descaling product and wait half an hour.
Make sure the interior of the boiler is thoroughly clean.

After half an hour has elapsed, empty the boiler and make sure you have removed the lime from the bottom, then rinse the
interior of the boiler. Do not immerse the boiler in water.
Make at least 3 pots of coffee to throw away.
The manufacturer declines all responsibility for malfunctioning if the operation described has not been carried out.

If the machine is put out of service, electrically disconnect it. Cut the power cord. In the case of scrapping, you must separate
the various materials used in making the machine and dispose of them based on their composition and on the legal provi-
sions in force in the country of use.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 1358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 1358 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info