712122
60
Zoom out
Zoom in
Previous page
1/72
Next page
60
the exterior of the appliance with the appliance switched off and cooled down. For
cleaning, use soft damp cloth. Do not use abrasives or chlorine-containing cleaning
agent in any case!
Empty the drip tray in time. Do not wait until it is full to the brim.
WARNING: Grouphead, poratfilter, filter, steam wand and its attachment will be
very hot during operation. In addition when the appliance is in operation hot water
or steam can escape. Turn off the appliance first (press ›on/off‹-switch), unplug the
power cord from the outlet, wait until the appliance has cooled down and empty
the water tank and drip tray when not using the appliance, moving the appliance,
or cleaning the appliance.
Never pour liquids over the appliance or power cord or immerse these into
liquids.
Do not use abrasive cleaners or cleaning pads (e.g. metal scouring pads) for
cleaning. Do not clean the appliance with any corrosive chemicals (e.g. bleach).
Do not immerse the appliance or power cord in water or any other liquid. Do
not spill or drip any liquids on the appliance or on the power cord to avoid risk
of fire and electric shock. When liquids are spilled in the appliance, immediately
switch off, unplug the power cord and wait for the appliance to cool down. Never
use any hard or sharp objects for working with the appliance or for cleaning the
appliance. Do not apply any violence to prevent damage to the components when
operating the appliance.
The cleaning tool contains a sharp needle. Be careful not to pierce yourself with
the needle. Never allow small children to play with the components and accesso-
ries of the appliance or the cleaning tool.
CLEANING THE STEAM WAND
Clean the steam wand each time after you have frothed milk, otherwise protein and
fat in the milk will form a solid crust, through which the steam wand and the ope-
nings in the attachment are clogged.
1. Make sure first that the appliance is in the standby position (the selector switch
is in the middle) and the steam wand and the attachment are no longer hot.
2. Remove the attachment from the steam wand and rinse the attachment in warm
water.
3. Wipe the steam wand with a damp cloth. Swing then the steam wand over the
drip tray and remove your hand from the steam wand.
4. Rotate the selector switch counterclockwise to the steam position. The milk resi-
dues will be rinsed from the inside of the steam wand.
5. Turn the selector switch clockwise back to the standby position. Press the ›on/
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 1340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 1340 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info