Manual Ariete 1340 (page 50 of 72) (English, German, Dutch, French, Italian, Portuguese, Spanish)

712122

Zoom out

Zoom in

1/72

appliance or place towels, napkins, or similar materials under or on the appliance.

If during operation liquids have run on the appliance, turn off the power immedia-

tely and unplug the power cord. Dry the appliance according to the instructions in

section ›Care and Cleaning‹.

To ensure that the thermal system and all inside pipes of the appli-

ance are pre-heated and have the required operating temperature,

the appliance shoud be prepared accordingly.

1. Fill the water tank (as described) up to the MAX-mark (1500 ml).

2. Turn the appliance on by pressing the ›on/off‹-switch and posi-

tion the steam wand towards the drip tray. The power indicator

lights red. During preheating the heating indicator lights red.

Once the appliance is ready for use, the heating indicator turns

off.

Note:

The pumping noise could be a little louder when the appliance is turned on for the

first time, because the thermal system and all inside pipes in the appliance have

to be filled with water. Once the appliance is ready for operation and the systems

are filled with water, the appliance operates quieter.

ATTENTION: When operating the appliance, always ensure that the water tank is

filled.

FILLING THE WATER TANK

1. Lift the cover of the water tank upwards. You can lift the water tank by the open

lid. Fill the water tank with clean, running cold water.

ATTENTION: When operating the appliance, always ensure that the water level in

the water tank is between the filling marks MIN (100 ml) and MAX (1500 ml). Check

the water level every time before turning the appliance on and fill with fresh water if

nessecary. Do not turn the appliance on when too little water in the tank (below the

fill mark 100 ml). Always use tap water for the appliance. Never fill the appliance

with any mineral water or distilled (demineralized) water. Do not overfill the water

tank. The content must not exceed the fill line 1500 ml.

Note:

After using the steam wand or if the appliance was in operation without any water

in the water tank, it may be that no water comes through the grouphead. In this

case, follow the steps in section ›Preparing the Appliance for Operation‹.

2. Place the filled water tank again into the appliance. Make sure that the guide

grooves on the back of the water tank are engaged the cutouts in the back of

the appliance. Press the tank down so that the water valve opens in the bottom

of the water tank.

MAX

MIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 1340 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariete 1340 Manual

Product: