Movie Mode:
1) Press the MODE button once—FEA appears on the LCD. (You have
five seconds to continue in this mode before the LCD defaults
back to main menu.)
2) Press the SELECT button to scroll to the movie icon.
3) Pause for approximately five seconds on the movie icon. The LCD
will default to main menu with your changed quality setting.
4) Press and hold the shutter-release button to record your movie.
(During movie recording, the camera will emit a steady beep and
the movie icon will flash on the LCD screen.)
5) To stop recording your movie, release the shutter-release button.
(The movie may automatically stop recording under certain
conditions—low battery, exhausted memory, etc.)
TV System Selection:
1) Use a TV cable to connect the camera to your TV.
2) Press the Power button to turn on the camera.
3) Press the Mode button until the NTSC or PAL icon appears on the LCD
screen.
4) Press the Select button to set NTSC or PAL to match your TV system.
5) The main menu will appear on your TV screen.
NOTE:
For USA and JAPAN, choose NTSC.
For EUROPE, choose PAL.
Delete Mode:
1. Press the Mode button until the trash icon appears on the LCD screen.
2. Press the Select button to delete all pictures.
3. The trash icon blinks as the camera and/or CF card memory clears.
4. The LCD screen will revert to the previous operating mode.
8
