36
Troubleshooting :
Before you decide the camera is faulty, check the following hints or instructions.
1. No Power The battery is exhausted, inverted polarities
2. No Photo is taken The internal memory or CF card is full
3. Can't use flash 1. It is set to suppress flash mode
2. Battery power is low.
4. Image too dark with flash 1. The subject is too far away
2. Your fingers covered the flash.
5. Image is blurred The lens is soiled
6. Can't erase the photo It is
protected. Unprotect it.
7. LCD monitor is off The Mode Dial is set incorrectly
8. No display on the status LCD The camera is auto power off
9. Card Full is seen No CF card
is inserted. The card is full
10. The object is too dark 1. Change the position to avoid backlit
problem.
2. Use eV compensate. Add 1eV or 1.5eV.
11. The object is unclear
Environment too dark. Use flash or tripod.
12. The object color is too yellow Change the White Balance to other settings.
13. I cannot use the CF card 1. Power off and then turn on the unit.
2. Check if the CF card is fully inserted.
14. I cannot use the video camera Make sure you have selected 'silent video'
mode mode
15. I am using “Easy-CD Creator 1.DC3200 Digital Camera’s installation CD
(version 4.X or below) and I includes an “auto-check” program to detect
have problem installing the if your PC has any software conflicts
camera driver, what should between PC’s own devices and the camera.
I do? If the “auto-checker” detects existence of
software conflicts, it will recommend and
guide the user to download the updated
driver/file from appropriate website to solve
the conflict problem.
2.If you cannot download the driver from
website for some reasons, try following the
following procedures:
a. Insert the DC3200 Digital Camera
installation CD into the CD-ROM drive
b. Look for the file “recover.bat” stored in
the CD
c. Double-click the file to initiate the
recovering process
d. Restart your computer
