477712
33
Zoom out
Zoom in
Previous page
1/51
Next page
8 Operation on ADSL, ADSL2 and ADSL2+ Accesses
ARGUS 41
PLUS
33
8 Operation on ADSL, ADSL2 and ADSL2+ Accesses
8.1 Determining the ADSL connection parameter
Use the ADSL 2-wire connection cable to connect the ARGUS directly to the ADSL access
(either before or after the splitter). The ARGUS supports the Annex B (ADSL via ISDN)
ADSL mode and the following standards:
The ARGUS automatically determines the DSLAM configuration ( G.DMT or ANSI) and
sets itself accordingly.
The ARGUS will set up an ADSL connection on the ADSL access and determine all of the
relevant ADSL connection parameters. The ARGUS displays the connection parameters
and saves these parameters in the internal FLASH memory after the connection is cleared
down if desired. The connection parameters last saved will be automatically sent to the
connected PC where they will be clearly presented in a measurement report see Page 41.
ARGUS display after being switched on
Set up an ADSL connection (synchronisation between the
ARGUS and DSLAM)
While the ARGUS is attempting to set up the ADSL
connection, the "L1 Sync" LED will flash. The ARGUS will
display the ADSL mode.
Once the connection has been set up (“L1 Sync” LED on
constantly), the ARGUS will determine and display the
ADSL connection parameters.
The ARGUS will next display the actually useable upstream
and downstream datarate.
Display the ADSL connection parameters
- ADSL: ANSI T1.413.2
- G.DMT: ITU-T G.992.1
- G.Lite: ITU-T G.992.2
- ADSL2: ITU-T G.992.3 and ITU-T G.992.4
- ADSL2+: ITU-T G.992.5
< ISP > Set up a PPP connection (see Page 36)
< SAVE > Save the results in the internal Flash memory
< STOP > Clear down the ADSL connection
Initialization
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 41 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 41 Plus in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info