477711

Argus 145 Manual

229
Zoom out
Zoom in
Previous page
1/244
Next page
6 Appendix
ARGUS 145
33
D) CAUSE-Messages – 1TR6 Protocol
Dec. Cause Description
01
Invalid call reference value Invalid call reference value
03
Bearer service not
implemented
The service is not available in the central office or at another location in the
network or the service has not been subscribed.
07
Call identity does not exist Unknown call identity
08
Call identity in use Call identity is already assigned to a “suspended“ connection.
10
No channel available No further B-channel is free on the subscriber’s access.
16
Requested facility not
implemented
The entered FAC-Code is unknown in this network.
17
Requested facility not
subscribed
The requested facility is not available, because the initiating or the remote
subscriber is not authorized.
32
Outgoing calls barred Outgoing calls are not possible due to the barring
33
User access busy If the sum of the number of free B-channels, the number of occupied B-channels,
the number of awarded B-channels and the number of calls without B-channel
assignment equals four, new incoming calls will be cleared from the network.
The calling subscriber receives a DISC with the cause “user access busy“ (= first
busy) and a busy signal.
34
Negative CUG comparison A connection is not possible due to a negative CUG (GBG) comparison.
35
Non-existent CUG This CUG (GBG) does not exist
37
Communication link as SPV
not permitted
A connection is not possible, since for example, the RFNR-test was negative
53
Destination not obtainable A connection cannot be made due to a wrong destination, service or
supplementary services.
56
Number changed Subscriber-B’s call number has changed.
57
Out of order The remote terminal is not ready.
58
No user responding No terminal has answered the incoming SETUP or the subscriber call was
disconnected, it is assumed that someone is present (Time-out for ringing T3AA).
59
User busy Subscriber-B is busy
61
Incoming calls barred Subscriber-B has blocked incoming calls or the requested service is not supported
by Subscriber-B.
62
Call rejected To Subscriber-A:
The requested connection is actively rejected by Subscriber-B (by sending a DISC
as answer to the incoming SETUP). Another terminal is in the setup phase with the
incoming call: The call has already been accepted by another terminal on the
bus.
89
Network congestion Network congested, e.g., switching equipment congestion, no conference set free,
90
Remote user initiated Rejected or disconnected by remote end (subscriber or exchange).
112
Local procedure error Sent in a REL
Caused by a local error (e.g. invalid message or
parameter, time-out, ...).
Sent in a SUSP REJ
Due to another already active supplementary service, the connection may not be
“suspended”.
Sent in a RES REJ
There is no “suspended” connection.
Sent in a FAC REJ
No further supplementary service request is possible, since there is still one being
processed or the supplementary service requested is not available in the current
state of the connection.
113
Remote procedure error Caused by an error at the remote end.
… 229 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 145 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argus 145

Argus 145 Quick start guide - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info