477715
160
Zoom out
Zoom in
Previous page
1/164
Next page
21 Appendix
160
ARGUS 126
C) CAUSE-Messages – 1TR6 Protocol
Dec. Cause Description
01
Invalid call reference value Invalid call reference value
03
Bearer service not
implemented
The service is not available in the central office or at
another location in the network or the service has
not been subscribed.
07
Call identity does not exist Unknown call identity
08
Call identity in use Call identity is already assigned
to a “suspended” connection.
10
No channel available No further B-channel is free
on the subscriber's access.
(only significant locally)
16
Requested facility not
implemented
The entered FAC-Code is unknown in this network.
17
Requested facility not
subscribed
The requested facility is not available, because the
initiating or the remote subscriber is not authorized.
32
Outgoing calls barred Outgoing calls are not possible due to the barring
33
User access busy If the sum of the number of free B-channels, the
number of occupied
B-channels, the number of awarded
B-channels and the number of calls without B-
channel assignment equals four, new incoming calls
will be cleared from the network. The calling
subscriber receives a DISC with the cause “user
access busy“ (= first busy) and a busy signal.
34
Negative CUG comparison Connection not possible due to
negative CUG comparison
35
Non-existent CUG This CUG (GBG) does not exist
37
Communication link as SPV not
permitted
A connection is not possible, since for example, the
RFNR-test was negative
53
Destination not obtainable A connection cannot be made due to a wrong
destination, service or supplementary services.
56
Number changed Subscriber-B’s call number has changed.
57
Out of order The remote terminal is not ready.
58
No user responding No terminal has answered the incoming SETUP or
the subscriber call was disconnected, it is assumed
that someone is present (Time-out for ringing
T3AA).
59
User busy Subscriber-B is busy
61
Incoming calls barred Subscriber-B has blocked incoming calls or the
requested service is not supported by Subscriber-
B.
62
Call rejected To Subscriber-A:
The requested connection is actively rejected by
Subscriber-B (by sending a DISC as answer to the
incoming SETUP). Another terminal is in the setup
phase with the incoming call: The call has already
been accepted by another terminal on the bus.
89
Network congestion Network congested, e.g., switching equipment
congestion, no conference set free,
90
Remote user initiated Rejected or disconnected by remote end
(subscriber or exchange).
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 126 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info