477715
8
Zoom out
Zoom in
Previous page
1/164
Next page
1 Introduction
8
ARGUS 126
The ARGUS Functions - Overview:
Protocol Recognition and B-Channel Test for ISDN Accesses
After you select the operation mode, the ARGUS will automatically determine the protocol
supported by the access under test and will then test the availability of the B-channels.
Telephone connections
Can a telephone call be placed from this access to every other number and/or can this
access receive a call?
Service tests
Does the tested access support connections with the most important services, such as,
ISDN telephone service, Group 4 - Facsimile or datatransmission at 64 kbit/s etc.?
Additionally, three user-specific services can be saved in the ARGUS and tested on the
access under test.
Bit error tests (BERT) for PRI/E1, BRI, U-interface accesses with evaluation in
accordance with G.821 and G.826
Performs a BERT in an extended call to itself, via a loopbox or in end-to-end operation. The
ARGUS will, if needed, handle the loopbox function itself.
The integrated MegaBERT extends the bit error test on E1/PRI accesses to a full 2 Mbit/s
bandwidth. Any distribution of time slots ( n x 64 kBit/s ) may be used.
Supplementary Services
The ARGUS automatically tests the supplementary services made available by the
exchange.
Leased Line Tests – tests permanent circuits with BERT and speech
NT simulation of a BRI or a PRI access
D-channel monitoring on BRI and PRI interfaces
All of the D-channel signals are captured and passed to the serial interface. When
passively monitoring, the ARGUS does not affect Layer 1.
CF Interrogation
The ARGUS will check, whether a call diversion has been setup on the access under test.
The ARGUS can setup or clear down call diversions in the exchange.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 126 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info