477714
121
Zoom out
Zoom in
Previous page
1/146
Next page
ARGUS
A
RGUS 125 121
Alerting mode You can specify whether, for an incoming call on a BRI point- to-
point access, the ARGUS should only display the access number
without extension or the complete number with extension.
If it is set to “Manual”, the ARGUS will display the extension (An
incoming call will be signaled. The ARGUS will send the Layer 3
message “Alert” when it accepts the call. The digits of the
extension that have been sent by this point will be displayed.).
With the Manual setting, an incoming call must be
answered within 20 seconds or it will be lost. Furthermore,
you should note that the remote subscriber will not hear a
ringing tone.
If it is set to “Automatically”, the ARGUS will only display
the access number without extension or, depending on the
configuration of the access in the exchange, it may not
display the number called at all.
Clock mode This parameter sets where the clock will be generated in the case
of a BRI or PRI access. You can either specify that the ARGUS
generates the clock (is Master) or that it is the slave of a clock
generated at the other end (Slave).
Default setting:
NT mode
TE mode
Permanent switch
circuit (leased
line)
Master
Slave
Slave
This setting will not be saved permanently, rather only applies for
the current measurement.
BRI
termination
Independent of the operation mode (TE or NT), a terminating
resistor can be switched-in on the BRI access.
Default setting:
NT mode
TE mode
Leased line
Terminating resistor switched-in
No terminating resistor is switched in
No terminating resistor is switched in
This setting will not be saved permanently, rather only applies for
the current measurement.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 125 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info