477714
116
Zoom out
Zoom in
Previous page
1/146
Next page
ARGUS
116
A
RGUS 125
15.2 The L1 Status of a PRI Access
The ARGUS displays the Layer 1 alarms and messages, which provide detailed
information regarding the state of the PRI access and the transmission line (For further
information, see the CCITT/ITU guidelines G.703 and G.704).
The ARGUS in its Main menu
The ARGUS displays the time that has elapsed since
the ARGUS was initially started or it was last reset in
minutes and seconds (05:18).
The measurement time and all Layer 1 alarms and
messages are updated continuously.
Use the cursor keys to scroll.
< X > The PRI relay for the Rx/Tx pin
assignment will be toggled to its other
position, regardless of the state that it
was in before.
This function is only available with the L1
status menu, if there is currently no
signal. The state of the relay will remain
unchanged when you close the L1 status
menu.
Wires = means that Rx/Tx are normal
Wires X means that Rx/Tx are
inverted
<RESET> Reset the History function and all
counters.
<SAVE> Save the results (see page 102)
OK symbol: +
Error symbol: -
History symbol: ! This indicates that, regardless of the current state of the
access (+ or -), an error occurred during the test period.
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argus 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argus 125 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info