642233
8
Zoom out
Zoom in
Previous page
1/11
Next page
www.argonaudio.com 8
TT- 2
Connecting to a Computer
Connect the USB-output of the unit to a free USB-socket on your computer and turn it on/make sure it is powered on.
The “new hardware found assistant“ will automatically detect the unit and announces it as a Microphone USB audio codec. There
is no need to install a driver manually.
After installation, one setting has to be done. For example - Windows 7® operating system:
Control Panel
Sound
Recording
Microphone USB Audio CODEC
Properties
Advanced: set to 2
channel, 16 bit, 48000 Hz (DVD Quality) Please note: Connection should be made to a USB-socket of your
computer directly. Connecting to USB-hubs or switches can cause problems.
Recording Programme
In case you do not have a recording programme installed on your computer, you may download one free from the
Internet. Recording programmes may be found by searching Google. In the menu of the recording programme,
source or input may have to be set to Microphone USB audio codec.
Please be aware that downloads from the Internet are made entirely at your own risk. Under no circumstances can
we carry responsibility or provide support for third-party software products sourced from the internet or for any
damage or problems arising from the use thereof. All downloads should be checked with an up-to-date anti-virus
programme. License fees may be applicable.
Mains power connection
The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to
ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket (13) on the rear of the record player before connecting the power
supply to the mains.
Fitting the lid
Fit the lid carefully over the hinge fasteners and adjust the screws (14) until the lid stays open where you want it to without being
too stiff to open or close.
Switching on and off
Pressing the power switch (1) alternately starts or stops the motor.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT2 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT2 USB in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon TT2 USB

Argon TT2 USB Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info